NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPRCH29T030QUF1 to RSRCH29T030QUF1.
Modern Tapered Hood Chimney describes this Omega National Products component designed for 30 inch wide wall range hoods. The alder construction ties this chimney directly to wood range hood installations where a matching wood species is important for a consistent cabinet run. As part of the Chimneys for Wood Range Hoods product class, it serves as the vertical section that visually extends the hood body toward the ceiling on wall-mounted layouts. The Modern Tapered design shapes the profile so the hood stack narrows toward the top, which creates a clean, contemporary look over standard 30 inch cooking surfaces. The 30 inch width focus simplifies planning for typical single-cabinet wall spaces above ranges. Under the RCH29T030QUF1 manufacturer part number, installers can reference a precise component identity when ordering or coordinating with shop drawings.
This 30 inch Modern Tapered Hood Chimney centers on wall hood applications that require a clearly defined width. By tying the Web Description directly to 30 inches, the part supports straightforward layout over standard 30 inch ranges and cooktops. The SAP description referencing "MODERN TAP WALL HOOD CHIMNEY,30',ALDER" confirms that this chimney targets wall-mounted hood installations rather than island configurations. For installers laying out upper cabinet lines, this identity as a wall hood chimney lets them coordinate hood centerline and adjacent cabinet widths around a known 30 inch zone. The alder species connection also matters when fitting the chimney visually between painted or stained wood cabinets in the same run.
The product class listing as Chimneys for Wood Range Hoods defines this part as the vertical stack above a wood hood body on wall installations. In practice, that means the chimney visually finishes the upper portion of the hood where it meets open wall or transitions toward the ceiling. The Web Description and SAP description both point to it as a 30 inch Modern Tapered Hood Chimney, so shops building or installing 30 inch wall hoods can select it as the matching upper component. Its role within the Kitchen & Bath Cabinet Accessories category places it firmly in cabinet-centered projects, where range hoods tie directly into custom or semi-custom cabinet layouts. Because the product name identifies alder as the material, designers working with alder cabinet doors and face frames can rely on species alignment when specifying this chimney alongside the main hood body.
The Modern Tapered profile described in both the product name and Web Description shapes how the chimney steps back visually as it rises, which helps installers deliver a finished hood that reads lighter toward the top instead of boxy. That tapered form supports contemporary or transitional kitchen designs where clean lines over a 30 inch range are important. The precise Omega National Products manufacturer part number RCH29T030QUF1 gives project teams a single reference for shop lists, RFQs, and installation notes, reducing confusion among similar chimney options. Being positioned specifically as a 30 inch wide wall hood chimney helps drawings and cut lists stay aligned to a known opening width in the cabinet run. The alder designation in the product name and SAP description supports coordinated finishing processes in the shop, since finish schedules can treat this chimney the same way as other alder wood range hood and cabinet components.
The Modern Tapered Hood Chimney is classified under Chimneys for Wood Range Hoods, so it is intended to work with wood range hood designs in kitchen cabinet projects.
The Modern Tapered Hood Chimney is specified for 30 inch wide wall hoods, which fits common 30 inch cooking zones and related cabinet openings.
The Modern Tapered Hood Chimney is identified as alder, which supports visual coordination with alder wood range hoods and matching cabinetry.
The SAP description states MODERN TAP WALL HOOD CHIMNEY,30',ALDER, indicating that this chimney is intended for wall hood installations rather than other locations.
The RCH29T030QUF1 Modern Tapered Hood Chimney is produced by Omega National Products, aligning with their wood range hood product line.
The Modern Tapered design narrows the chimney toward the top, creating a cleaner, more contemporary look above 30 inch wall hoods in kitchen cabinet layouts.
The Modern Tapered Hood Chimney, identified as RCH29T030QUF1, gives cabinet shops and installers a defined 30 inch alder chimney solution for wall-mounted wood range hoods. Its Modern Tapered form, alder material, and Omega National Products branding work together to support coordinated hood design, consistent cabinet runs, and straightforward specification on kitchen projects centered around 30 inch cooking widths.
Sold In: 1 Each