
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPRCH29T030XUF1 to RSRCH29T030XUF1.
30 inch modern tapered hood chimney from Omega National Products is a wood chimney section designed for Modern Tapered Wood Hoods, so it extends the hood body to reach the needed vertical height in a coordinated style. The 30 inch width matches 30 inch Modern Tapered Wood Hoods, which helps the chimney align with the hood face for a clean transition line across cabinets. The chimney height of 24.75 inches gives installers a generous starting dimension that can be adjusted on site, which suits different ceiling heights or duct layouts in kitchen runs. All surfaces are sanded to 220 grit, so the chimney arrives ready for stain or paint without heavy prep, saving time at the finishing stage. The paint grade construction is intended to accept a painted finish, which lets this chimney blend into painted cabinet layouts or contrast intentionally with adjacent cabinets.
Chimneys are trimmable to the desired height, which lets installers cut from the 24.75 inch starting height down to match ceiling conditions without redesigning the hood layout. Because the piece is designed to fit Modern Tapered Wood Hoods, the mounting and layout work revolves around a known hood shape, simplifying layout marks on the wall. All surfaces sanded to 220 grit arrive ready to finish, so finishers can move directly to priming or coating steps based on their system. The paint grade material is intended for a painted finish, allowing the chimney to tie into painted wall cabinets or hood surrounds in the same project.
The product class as a chimney for wood range hoods defines it as the upper section above a wood hood, so it visually carries the hood line toward the ceiling in kitchen layouts. Designed to fit Modern Tapered Wood Hoods, it works where that specific hood style is installed, maintaining consistent angles and proportions in the upper section. The 30 inch width suits installations built around a 30 inch Modern Tapered Wood Hood, which is common over 30 inch cooktops or ranges in standard cabinet plans. With a starting height of 24.75 inches, the chimney works in rooms where the hood needs extension toward the ceiling, providing enough length to accommodate many typical wall heights before trimming.
The paint grade description signals that this chimney belongs in painted kitchen schemes, where the hood and chimney are finished to coordinate with doors, frames, and trim. All surfaces sanded to 220 grit support use in projects that demand a smoother, more uniform finish appearance, such as full overlay cabinet lines or modern kitchen designs. As a component from Omega National Products, identified by manufacturer part number RCH29T030XUF1, it fits into projects already using Omega National Modern Tapered Wood Hoods for consistent sourcing and part matching.
Chimneys are described as trimmable to the desired height, so installers can adjust from the 24.75 inch base height to match finished ceiling conditions rather than compromising hood elevation. This trim-to-fit approach helps maintain planned clearances between the hood and the cooking surface while still reaching the ceiling visually. Because the chimney is designed to fit Modern Tapered Wood Hoods, cuts at the bottom or top can be planned around a consistent profile, which supports straighter joints and easier scribing to walls or soffits.
All surfaces sanded to 220 grit contribute to more predictable finishing because the wood surface arrives at a uniform smoothness, reducing swirl marks and helping coatings lay down more evenly. The paint grade designation means the material is oriented toward opaque coatings, so finishing systems focused on solid colors can be applied without reworking the underlying substrate. Together, the width tailored for 30 inch Modern Tapered Wood Hoods and the trimmable height allow repeatable sizing across multiple units in the same project, supporting consistent sight lines and hood-to-ceiling reveals along a run of cabinets.
The chimney is designed to fit Modern Tapered Wood Hoods, which helps the profile and width match that specific hood style in kitchen installations.
The chimney is 30 inches wide and 24.75 inches high, providing a sized match for 30 inch Modern Tapered Wood Hoods and a tall section that can be trimmed on site.
The chimney is trimmable to the desired height, so installers can cut it from the 24.75 inch starting dimension to align with actual ceiling or soffit conditions.
All surfaces are sanded to 220 grit and described as paint grade, so the wood is ready for applied finishes focused on painted kitchen hood designs.
The manufacturer part number is RCH29T030XUF1, which identifies this specific 30 inch Modern Tapered Trimmable Hood Chimney from Omega National Products.
The product class as a chimney for wood range hoods means it extends a wood hood body upward, completing the look in kitchen cabinet and hood installations.
This 30 inch modern tapered hood chimney, designed to fit Modern Tapered Wood Hoods, gives installers a matched upper section that continues the hood design toward the ceiling. The 24.75 inch trimmable height supports precise ceiling alignment, while the paint grade, 220-grit-sanded surfaces streamline finishing. With a width tailored to 30 inch Modern Tapered Wood Hoods and part number RCH29T030XUF1 from Omega National Products, it ties directly into projects already built around that hood style. Specify this chimney when the job requires a coordinated, paint-ready extension for a Modern Tapered Wood Hood.
Sold In: 1 Each