NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPRCH29T036OUF1 to RSRCH29T036OUF1.
36 inch modern tapered hood chimney describes a chimney section sized for 36 inch wide wall-mounted range hoods, so installers can match the hood width when planning cabinetry and sight lines. The product name identifies this as a modern tapered chimney style, which helps align the hood design with a cleaner, more contemporary kitchen look. Brand identification as Omega National Products signals a dedicated line of wood range hood components, so this chimney fits into a consistent product family for shop-standard layouts. The red oak material called out in the product name supports projects that use red oak cabinetry or trim, helping installations keep grain and color families aligned during finishing. Classification under chimneys for wood range hoods clarifies that this piece is intended as the visible upper section of a wood range hood assembly, giving installers a clear role for this component in their design and cutlist.
The identification as a chimney for 36 inch wide wall hoods gives installers a clear width target when laying out upper cabinets and hood centerlines. Knowing this chimney is part of the chimneys for wood range hoods class helps plan it as the vertical enclosure above the hood body, so duct runs and wall penetrations can be located within that footprint. The modern tapered description guides expectations about the outer profile, which matters when aligning crown or adjacent panels around the chimney. The red oak designation signals that field trimming or scribing will be performed in a hardwood species familiar to cabinet shops, which can simplify edge work and on-site adjustments. Referencing the Omega National Products brand also grounds installation decisions in a known product line used within the woodworking trade.
The category listing as wood range hoods and the class of chimneys for wood range hoods place this part in kitchen projects where a wood-clad hood is desired over a cooking surface. The product name states it is for 36 inch wide wall hoods, directing its use to wall-mounted installations rather than island layouts. Because the description specifies a modern tapered hood chimney, it suits designs that favor a simple, angled profile over more ornate shapes, which can coordinate well with flat-panel or streamlined cabinet doors. The red oak material reference supports use in kitchens built with red oak frames, doors, or panels, helping create a consistent grain and tone from hood to surrounding cabinetry. The Omega National Products branding ties this chimney into a system of wood range hood components aimed at professional woodworking shops and serious DIY builders.
The 36 inch sizing called out in the product name provides a clear design starting point, helping fabricators cut adjacent fillers and cabinets to work cleanly with the hood centerline. Labeling as a modern tapered chimney allows shops to expect an angled vertical profile, which affects how they design any side panels, soffits, or trim intersecting the chimney. The red oak designation means sanding, shaping, and edge easing can follow standard red oak shop practices, supporting consistent finishing results across doors, panels, and the hood chimney. Placement in the chimneys for wood range hoods class frames this component as the vertical enclosure above the hood body, guiding project drawings to reserve that space for duct concealment and visual balance. The Omega National Products manufacturer reference gives shops a stable part identity, so they can specify the same RCH29T036OUF1 chimney on repeat jobs for uniform outcomes.
The chimney is identified for 36 inch wide wall hoods in the wood range hoods category, so it is intended to work as the upper section of a wall-mounted wood range hood assembly.
The modern tapered hood chimney description indicates an angled, tapered upper profile, which influences how the chimney meets the wall and ceiling in contemporary kitchen layouts.
The 36 inch reference tells installers this chimney is sized for 36 inch wide wall hoods, guiding hood placement relative to cooktop and cabinet widths in the kitchen plan.
The red oak material noted in the product name lets shops align the hood chimney with red oak cabinetry, supporting unified staining, clear coating, and grain matching in the kitchen.
The chimneys for wood range hoods class identifies this part as the vertical enclosure above the hood body, planned to visually extend the hood toward the ceiling.
The RCH29T036OUF1 manufacturer part number uniquely identifies this specific 36 inch modern tapered red oak hood chimney within the Omega National Products line.
The product name Modern Tapered Chimney for 36 inch Wide Wall Hoods, Red Oak, RCH29T036OUF1 identifies a chimney built for 36 inch wall-mounted wood range hoods in red oak. The chimneys for wood range hoods classification defines its role as the vertical enclosure above the hood. The Omega National Products brand link places it within a focused wood range hood program, supporting consistent choices across multiple projects. For kitchen work calling for a 36 inch wall hood and red oak cabinetry, this chimney offers a defined size, style, and material to anchor the hood design.
Sold In: 1 Each