Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Omega National SW Series tambour door is a solid cherry wood panel in a flat edge profile, supplied unfinished and sized at 95 inches long by 12 inches wide to cover tall or extended cabinet openings that shorter standard panels cannot reach.
Standard tambour doors top out well below 95 inches, which makes this panel the right choice when the opening is taller than a typical appliance garage. It suits cabinet runs that extend from counter height toward the ceiling, enclosures built around tall pantry sections, and custom millwork where the designer needs a continuous tambour surface that shorter panels cannot span. The 12-inch width keeps it suited to narrow openings rather than wide bays, so measure the clear opening width before ordering. The track hardware that guides this door is sold separately; the panel ships as the door only.
Cherry is a closed-grain hardwood that takes stain evenly and develops a warm amber tone over time, which makes it a natural match for traditional, transitional, and Arts and Crafts kitchen styles. Because this panel ships unfinished, the finisher controls the final color and sheen, whether that is a clear topcoat that lets the natural cherry come through, a stain that ties it to existing cabinetry, or a painted finish for a cleaner contemporary look. The flat edge profile on each slat keeps the surface face smooth rather than adding a decorative radius, so the finished door reads as a clean, organized plane rather than a heavily textured one.
Custom cabinet shops and finish carpenters reach for this panel when a project calls for a tambour enclosure that goes beyond the height range covered by shorter stock sizes. Designers specifying a pantry wall with a tambour-concealed appliance section, or a tall butler's pantry with a rolling door, will find the 95-inch length gives enough panel to cover the opening with material to spare for trimming to final height. Homeowners tackling a high-end renovation who want a wood tambour treatment that matches existing cherry cabinetry will also find the unfinished surface gives them full control over the match.
No. This SKU is the tambour door panel only. The track, guides, and mounting hardware are sold separately and must be compatible with this panel's 5/16-inch thickness and 12-inch width.
Solid wood tambour panels can generally be cut to length in the shop, but the cut end will need to be finished or capped to match the original edge treatment. Work from the sourced dimensions and confirm the cut approach with your track system's installation requirements.
It ships unfinished. Stain, paint, or a clear topcoat can be applied after installation or before, depending on the finishing sequence in your shop.
This is solid cherry wood, not a veneer over a substrate. The SW Series uses solid wood construction throughout.
When the opening is taller than standard tambour stock can cover and the finish schedule calls for cherry, this 95-inch solid wood flat-edge panel is the one to specify.
Sold In: 1 Each