NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPSW-42-HI502 to RSSW-42-HI502.
Omega National SW Series Hickory Tambour Doors give you a solid wood rolling front for appliance garages and similar cabinet applications, so you can match wood cabinetry while using a flexible door style. The solid wood construction, described as "SOLID WOOD TAMBOUR DOOR" in the SAP description, provides a real-wood face that can integrate with hickory casework where a hardwood appearance matters. The 47 inch width stated in the web description sets this panel up for wider openings where a continuous tambour surface is needed across the span. The 5/16 inch depth listed in the web description keeps the door profile slim, which helps when routing or building tracks that need to stay within standard cabinet side thickness. The product name calling out flat edge design gives you a straight, uniform look across the slats, which is useful when you want a cleaner visual line instead of a profiled face on the door surface.
The web description lists this Omega National SW Series Hickory Tambour Door at 47 inches wide, which lets you design cabinet or appliance garage openings around a fixed panel size for predictable fit. The SAP description identifies the overall size as 47 by 36, giving you a height reference when planning the stack of components above or below the opening. The 5/16 inch depth in the web description tells you how much space the tambour section occupies, which is important when cutting side grooves or building guide channels into standard cabinet sides. The product class of Appliance Garages & Tambour Doors confirms its role in cabinet front construction, which helps when placing it in design drawings or material lists for kitchen and bath layouts.
The product class lists this item under Appliance Garages & Tambour Doors, so it is suited to cabinet openings where a rolling door is preferred over hinged fronts. The 47 inch width in the web description positions it for wider upper or counter-height bays that need a single continuous tambour face. The SAP description calling it a solid wood tambour door means the active surface is wood, which works in kitchens or baths where hickory cabinetry is already specified. The hickory identification in both the product name and web description ties it directly to hickory cabinet runs, allowing designers to carry the same species across doors, frames, and specialty fronts. The 47 by 36 reference in the SAP description signals a vertically substantial front, which helps when covering stacked storage or taller appliance garage openings that need more face height.
The manufacturer part number SW-42-HI502 uniquely identifies this Omega National Products tambour, which simplifies ordering and reordering when a project standardizes on this specific hickory front. The SW Series designation in the product name groups it with other Omega National SW Series Hickory Tambour Doors, allowing shops to align multiple openings around the same construction style. The 5/16 inch depth, as specified in the web description, gives a precise thickness for shop drawings, which reduces layout errors when machining grooves for the rolling action. The flat edge detail described in the product name yields a uniform slat interface, which reduces visual distractions across the surface and helps achieve consistent alignment from one door to the next in a run of cabinets. The solid wood description in the SAP entry supports finishing workflows built around real hickory, allowing finish schedules to treat this door like other hickory components in the job.
The Omega National SW Series Hickory Tambour Door is listed at 47 inches wide and described as 47 by 36 overall, with a 5/16 inch depth, so cabinet openings and tracks can be planned around those measurements.
The SAP description calls this a solid wood tambour door and the product name specifies hickory, so the rolling surface presents real hickory for matching hickory cabinetry and trim in the same project.
The product name notes a flat edge configuration, so the slat joints present straight, simple lines, which creates a cleaner look across the tambour face in modern or transitional cabinet designs.
The product class is Appliance Garages & Tambour Doors, indicating use on cabinet openings where a rolling front is desired, such as appliance garages or specialty storage bays in kitchens and baths.
The web description lists a 5/16 inch depth, which gives a clear profile thickness, helping drafters and fabricators size grooves or tracks to guide the tambour within cabinet sides.
The manufacturer part number SW-42-HI502 uniquely identifies this Omega National Hickory Tambour Door, which supports accurate specifying and consistent reordering across multiple cabinets or future matching work.
The Omega National SW Series Hickory Tambour Doors identification ties this product directly to a solid wood hickory rolling front from Omega National Products, so specification remains clear from drawings through ordering. The 47 inch width, 47 by 36 size reference, and 5/16 inch depth give fabricators concrete dimensions to design around when planning appliance garages or other tambour-front openings. The flat edge configuration and hickory wood, as stated in the product name and descriptions, support projects that call for a clean-faced, species-matched tambour solution within kitchen and bath cabinetry. For cabinet runs that already feature hickory components, this tambour door offers a coordinated rolling front defined by the SW-42-HI502 part number.
Sold In: 1 Each