Omega National 36"W Maple Signature Craftsman Straight Wall Mount Range Hood, Broan Compatible Liner Included - R2036SMB1MUF1

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR2036SMB1MUF1 to RSR2036SMB1MUF1.

Omega National 36 Inch Maple Range Hood Use

Omega National 36 inch maple range hood describes a 36 inch wide Signature Craftsman straight wall mount wood range hood designed for kitchen wall installations, giving cabinet shops and installers a defined size to build around upper cabinet runs. The maple construction described in the product name works as a ready-to-finish surface, so finishing crews can stain or paint it to match or coordinate with surrounding cabinetry. The wall mount design referenced in the name positions the hood above the cooktop or range on a vertical surface, which helps align it with standard wall cabinet layouts. The Signature Craftsman styling signaled in the name supports projects that call for a craftsman-influenced appearance, helping designers keep a consistent visual theme across the kitchen. The 36 inch width noted in the name suits common 30 inch cooking surfaces with side clearances, helping layout planning.

Key Details That Support Hood Projects

• The product is classified as a wood range hood, which places it in the same working category as other cabinet-grade components and lets shops handle it with standard woodworking processes during layout and finishing.
• The maple material referenced in the product name is listed as available among ready to finish woods, so finishing teams can sand, stain, or topcoat as needed to align with existing or new cabinet finishes.
• The craftsman straight design indicated in the name provides a rectangular, straight profile that pairs well with face frame or frameless lines, simplifying layout against adjacent wall cabinets and moldings.
• The hood is part of Omega National Products wood range hoods, so shops familiar with this line can align it with existing Omega National installations or design standards already used in their projects.
• The 36 inch width specified in both the name and description gives designers and installers a fixed dimension for planning cabinet spacing, trim terminations, and vent run placement over the cooking surface.

Installation And Mounting Approach Details

The web description states that the hood installs easily using a standard patent-pending French cleat hanging system, which means installers can set a cleat on the wall and then hang the hood body on it for alignment. This type of hanging system supports two-stage installation, allowing the wall cleat to be leveled and secured before lifting the hood into place. The same description explains that the product is designed for Broan ventilators NPRHVBB20SM and NPRHVBF10SM, so the interior layout is shaped for those ventilator models when planning cutouts and duct transitions. All mounting and installation hardware is stated as provided, which keeps installers working from one coordinated hardware set during the hanging and fastening steps.

How This Maple Hood Works In Kitchens

Where This Wood Range Hood Fits Best

The product is categorized under wood range hoods for kitchen and bath cabinet applications, so it is intended to integrate directly into cabinet packages rather than stand-alone appliance environments. The 36 inch width called out in both the name and description positions it above standard cooking appliances, helping align the hood with typical range and cooktop sizes used in residential projects. The wall mount orientation described in the product name makes it suitable for straight wall installations where cabinets flank a cooking center, giving designers a clear focal point between runs of wall cabinets. The craftsman straight styling referenced in the name supports jobs that emphasize linear profiles and framed detailing, allowing this hood to coordinate with Shaker or similar cabinet door styles. As a maple ready-to-finish unit, it can be finished to blend into light or dark schemes, which is useful when tying together mixed-wood or painted designs around the cooking zone.

Details That Support Consistent Results

The web description explains that this hood uses a standard patent-pending French cleat hanging system, which supports repeatable mounting because installers follow one consistent hanging method job after job. That same hanging system allows the wall cleat to be set first, so crews can focus on level and stud engagement before lifting the hood into position, which streamlines alignment work. The description further notes that the hood works with rectangular hood liners in a silver metallic color that are designed for Broan ventilators NPRHVBB20SM and NPRHVBF10SM, so ventilation planning can follow the geometry and connection points of those specific ventilator models. Having a liner matched to those ventilators helps create a defined metal capture area inside the wood hood, which is important when positioning the ventilator body and duct connection. The ready to finish statement applying to maple confirms that the surface is intended for field finishing, letting finishing crews time staining or painting with the rest of the cabinetry to keep color and sheen consistent across the whole room.

Common Questions About This Omega National Hood

Select This Hood For Maple Craftsman Projects

This Omega National 36 inch maple range hood joins the wood range hood category with a Signature Craftsman straight wall mount design, so it fits naturally into cabinet-grade kitchen work. The ready to finish maple construction described in the data gives finishing teams the flexibility to color match existing cabinetry or set a contrasting focal point around the cooking area. The standard patent-pending French cleat hanging system referenced in the description supports streamlined installation, which matters when coordinating hood placement with wall cabinets and tile work. With a rectangular hood liner designed for Broan ventilators NPRHVBB20SM and NPRHVBF10SM, this unit provides a defined path for integrating ventilation components inside a custom wood shell, so projects can move from design to installation with a clear plan.