Wall Mount Chimney Wood Range Hoods - Omega National Products RCHT36MUF1

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPRCHT36MUF1 to RSRCHT36MUF1.

Wall Mount Chimney Wood Range Hood Solution

Wall mount chimney wood range hood describes this Omega National Products RCHT36MUF1 component for chimney-style wood range hoods. The SAP description "SIGNATURE CHIMNEY,36"W X 31.5"H,MAPLE" identifies a 36 inch wide, 31.5 inch high maple chimney, so installers know it is sized for a 36 inch hood opening in a wood range hood layout. The product class "Chimneys for Wood Range Hoods" shows that it serves as the chimney section in a wood hood assembly, which helps organize hood projects by separating hood body construction from chimney extension work. The maple material reference in the description signals a solid wood appearance that can align with maple cabinetry, supporting consistent visual runs across a kitchen install. The brand Omega National Products gives a clear source reference, which matters when matching existing Omega National hood components on site or planning future service work using the same manufacturer.

Cut-To-Size Chimney Details That Support Jobs

• The web description states that cut-to-size chimneys are specifically designed to fit 30, 36, 42 and 48 inch wide hoods, so one chimney style can serve multiple hood widths, simplifying stocking for repetitive kitchen layouts.
• The same description notes these cut-to-size chimneys are available in two heights, 23-1/2 inch and 31 inch class, which lets the installer select height to suit ceiling conditions or design intent while working inside the specified size range.
• The SAP description identifies this unit as 36 inch wide by 31.5 inch high, which gives a defined footprint for layout around upper cabinets and trim, helping avoid conflicts with adjacent wall runs or decorative moldings during installation.
• The maple reference in "SIGNATURE CHIMNEY,36"W X 31.5"H,MAPLE" ties the component to maple wood aesthetics, supporting stain or clear finishes that match maple cabinet programs on residential or light commercial projects.
• The web description states that these cut-to-size chimneys are made in the USA, providing a clear origin point that can matter on projects where source and domestic manufacturing are part of the specification or bid documentation.

Chimney Sizing, Fit, And Range Hood Alignment

The statement that cut-to-size chimneys are designed to fit 30, 36, 42 and 48 inch wide hoods means this 36 inch wide maple chimney targets hood bodies built to those common widths, so cabinet layouts around standard 30 to 48 inch cooking equipment can be coordinated more easily. The specified 31.5 inch height for this RCHT36MUF1 model places it in the taller of the two height options mentioned in the web description, giving extra vertical reach for taller wall spaces or extended chimney designs above the hood body. Because the product class is "Chimneys for Wood Range Hoods," this component is intended to integrate into wood hood assemblies rather than metal wall hoods, allowing woodworkers to plan joinery, finishing, and trim transitions with wood-working tools and methods.

Using This Omega National Maple Chimney On Projects

Where This Maple Chimney Wood Range Hood Fits

The web description states that cut-to-size chimneys are specifically designed to fit 30, 36, 42 and 48 inch wide hoods, so this 36 inch wide, 31.5 inch high model RCHT36MUF1 suits wall mount wood hood designs in those standardized cooking zones. When drawings call for a chimney-style wood range hood over 30 to 48 inch cooktops, the 36 inch width reference gives a clear match point to the hood body width, reducing layout guesswork between upper cabinets. The maple designation in "SIGNATURE CHIMNEY,36"W X 31.5"H,MAPLE" aligns this chimney with maple cabinet suites, so kitchen runs using maple fronts, face frames, and crown can extend that same wood species through the hood area without introducing a different wood tone. The product class "Chimneys for Wood Range Hoods" keeps this component within wood hood projects instead of mixed-material assemblies, which can simplify finishing schedules and sequencing in the shop or on site.

Why Cut-To-Size Chimney Design Supports Repeatable Results

The description that these are cut-to-size chimneys means the component is built with the expectation that installers or shops will trim it to the required dimension, which helps accommodate varying ceiling heights while still starting from a known 31.5 inch high maple chimney blank. Because the same cut-to-size family is designed to fit 30, 36, 42 and 48 inch wide hoods, a shop can standardize on this Omega National Products solution across several hood widths, keeping the workflow consistent even as finished chimney lengths change from job to job. The availability of two height ranges, 23-1/2 inch and 31 inch class as stated in the web description, means crews can choose the height family that most closely matches project elevations before trimming, minimizing material removal while still hitting the design line above the hood body. The made in the USA note in the web description gives a clear sourcing reference, which can streamline documentation when project specifications call out domestic production for wood hood components.

Common Questions About The RCHT36MUF1 Chimney

Choose This Maple Chimney For Wood Hood Projects

The SAP description for the RCHT36MUF1 as a 36 inch wide by 31.5 inch high maple "SIGNATURE CHIMNEY" and the product class "Chimneys for Wood Range Hoods" identify a focused component for chimney-style wood hoods. The web description adds that these cut-to-size chimneys fit 30, 36, 42 and 48 inch wide hoods and come in two height ranges, giving the flexibility to work across standard hood widths while trimming for actual ceiling conditions. For projects where a maple wood chimney extension over a wall mount wood range hood is required, this Omega National Products cut-to-size chimney lines up with those dimensional and material needs.