Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Omega National Signature series chimney is the upper enclosure section that connects a wall mount wood range hood to the ceiling or upper wall area. It is a decorative wood component supplied in paint grade, sized to suit a 36-inch hood installation.
A wall mount range hood assembly typically has two visible zones: the lower hood body that flares out over the cooktop, and the chimney that rises from the hood body up to the ceiling or soffit. This chimney handles that upper zone. Without it, the hood body sits in the air with nothing connecting it to the ceiling line, and the finished look is incomplete. This piece closes that gap and gives the installation a continuous, built-in appearance from countertop to ceiling.
The chimney is a decorative enclosure. It houses the duct run above the hood body but does not move air on its own. The ventilation unit that provides the actual airflow is a separate component.
Paint grade wood is manufactured to accept paint rather than to showcase a natural grain. The surface is prepared for primer and topcoat, which makes it practical for kitchens where the hood is meant to disappear into the painted cabinetry rather than stand out as a wood accent. After priming and painting on-site, the chimney reads as a seamless part of the wall rather than an add-on. Because it ships unfinished, the painter has full control over the color match.
This piece is the right choice for a painted kitchen where the hood assembly needs a clean, continuous run from the hood body to the ceiling. Designers specifying a built-in look for a painted inset or full-overlay kitchen will find that paint grade wood gives them the control a prefinished or stained species cannot: the color is mixed to match, not selected from a swatch. Cabinet shops building out a hood surround in a painted finish and installers completing a Signature series wall mount hood both benefit from a chimney that can be finished in the field to match whatever the kitchen calls for. Confirm the hood body model and the ceiling height so the chimney dimensions suit the installation before ordering.
No. This is the decorative wood chimney enclosure only. The ventilator or power pack that moves air is a separate component and is selected based on the hood body and cooktop requirements.
This is the chimney section, the upper enclosure that bridges the hood body and the ceiling. The lower hood body is a separate piece in the Signature series lineup.
Paint grade wood is manufactured to receive paint, not to display natural grain. For a stained finish, a species-specific version of this chimney is the better fit.
The chimney is 17-3/8 inches wide, 23-1/2 inches tall, and 9-11/16 inches deep. Confirm these dimensions against the ceiling height and hood body before ordering.
For a painted kitchen where the range hood needs to read as part of the architecture rather than an appliance, this paint grade chimney gives the installer the last piece of the enclosure and the freedom to match the final color on-site.
Sold In: 1 Each
