NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPRCH36QUF1 to RSRCH36QUF1.

36 Inch Wall Mount Chimney For Signature Hoods

36 inch wall mount chimney gives a finished vertical extension above Signature Series range hood covers, so a 36 inch wide hood can visually tie into the wall or ceiling with a continuous alder surface. The product is a cut-to-size chimney from Omega National Products, which means the 23-1/2 inch height can be trimmed on site to align the top of the chimney with the surrounding structure for a clean installation line. It is specifically designed to fit 36 inch wide hoods within the broader Signature Series family that also covers 30, 42, and 48 inch hood widths, so it serves as the sized match for the 36 inch version. Being part of the Chimneys for Wood Range Hoods product class, it works as the upper wood component that visually continues the hood body.

Key Chimney Details For Practical Planning

• The 36 inch width matches 36 inch Signature Series wood range hood covers, which helps align hood and chimney faces without awkward overhangs.
• The 23-1/2 inch height gives material to trim, so installers can cut the chimney to suit ceiling height or design reveals.
• Cut-to-size design lets crews resize on site, supporting consistent results across jobs with slightly different dimensions.
• Use with Signature Series hoods that also offer 30, 42, and 48 inch widths, so a shop can standardize across that product family.
• Alder construction allows the chimney to be finished in ways that coordinate with other alder components in the kitchen.

Cut To Size Chimney Fit And Setup Details

This Omega National chimney uses a 23-1/2 inch tall profile, giving enough height for installers to cut away material while still reaching the desired final dimension. Since it is designed for 36 inch Signature Series wood range hood covers, its width is coordinated so the front and sides align with the hood body, helping maintain straight lines at door and cabinet reveals. Being wall mount oriented, it is sized to rise directly above the wall-mounted hood location, which simplifies layout when marking stud positions and aligning with the existing cabinet run or wall surface.

Using This Omega National Chimney On Projects

Where This Chimney Fits In Kitchen Layouts

This Omega National Products 36 inch wall mount chimney works with the Signature Series wood range hood covers, so it fits jobs where those hoods are already part of the design. Because the chimney is specifically designed to fit 30, 36, 42, and 48 inch wide hoods, the RCH36QUF1 part occupies the 36 inch slot in that lineup, supporting layouts that center a 36 inch hood over a cooking surface. The 23-1/2 inch cut-to-size height lets shops and installers adapt the chimney to a range of wall heights while still finishing at a defined point above the hood. As a Chimneys for Wood Range Hoods component in alder, it is suited to kitchens where the hood assembly is meant to read as a wood feature rather than metal, tying in with other alder trim, moldings, or cabinetry.

Why Cut To Size Alder Design Supports Workflow

The cut-to-size chimney design means the 23-1/2 inch height is not a fixed finish dimension, so installers can trim the lower or upper edge to bring the chimney to the exact height needed relative to ceilings or bulkheads, which reduces layout compromises on site. Matching the 36 inch Signature Series hood width keeps field fitting focused on height and finish rather than trying to adapt a mismatched chimney width, helping reduce rework and edge adjustments. Working in alder allows shops to sand, stain, or clear-finish the chimney along with matching alder hood covers and other alder components, which streamlines finishing schedules. The defined manufacturer part number RCH36QUF1 helps dealers, shops, and installers reorder the exact same 36 inch Signature Series chimney for repeat projects or for replacing a damaged chimney without re-specifying from scratch.

Common Questions About This 36 Inch Chimney

Selecting This Chimney For Signature Hood Projects

Choosing this 36 inch wall mount chimney for Signature Series range hood covers ties the hood installation to a defined Omega National Products component in alder. The 23-1/2 inch cut-to-size height supports field trimming, and the RCH36QUF1 part number lets shops and installers consistently specify the same 36 inch Signature Series chimney across projects.