36" Wall Mount Chimney for Signature Series Range Hood Covers, Hickory

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPRCH36HUF1 to RSRCH36HUF1.

36 Inch Wall Mount Chimney For Signature Hoods

36 inch wall mount chimney describes a cut-to-size hickory chimney designed for Signature Series range hood covers, so it extends the wood hood body to the proper finished height in a coordinated style. This chimney is built for 36 inch wide hoods within that Signature Series, giving installers a defined match when laying out wall cabinets and hood placement. The part is classified as a chimney for wood range hoods, which means it is sized and shaped specifically to finish the vertical run above a wood hood cover instead of a metal canopy. The product height of 23-1/2 inches establishes a working envelope for cutting, so the installer can trim the chimney to suit ceiling height or design lines while staying inside the intended proportions of the Signature hood system.

Key Chimney Details That Support Hood Layout

• The cut-to-size chimney design lets the 23-1/2 inch hickory piece be trimmed on site, so installers can align the finished hood height with ceilings, crown, or adjacent cabinet runs without changing the hood body.
• Compatibility with 36 inch wide Signature Series wood range hoods means the chimney width is matched to that hood size, which reduces field scribing and helps keep the hood stack visually straight over a 36 inch cooktop area.
• Use with Signature Series range hood covers ties the chimney into a defined product family, so the wood stack above the hood follows the same design intent as the cover and maintains a consistent appearance across the installation.
• The 23-1/2 inch height option gives an installer a known starting dimension, which simplifies planning for different ceiling heights by calculating how much material can be removed while still covering the duct run.
• Hickory construction creates a consistent wood species for the chimney, so finishing and color matching can be coordinated with hickory cabinets or trim in the same kitchen run.

Installation Fit For Wall Mount Wood Range Hoods

This Omega National chimney is specified for wall mount use above wood range hoods, so it aligns with typical wall cabinet and stud layouts around a cooktop. The 36 inch width focus supports installations where the hood body has already been set at 36 inches, allowing the chimney to be integrated directly above that size without reworking the hood footprint. Because the chimney is cut-to-size within its 23-1/2 inch height, installers can trim the bottom or top edges to match ceiling lines, soffits, or decorative trim while keeping the main field dimension predictable. Being part of the Signature Series range hood cover system, the chimney is shaped to visually continue the hood stack, which helps maintain a clean vertical line from hood to ceiling in both standard and taller wall applications.

Using This Omega National Chimney In Real Projects

Where This Hickory Chimney Fits Best

This Omega National chimney fits projects using a 36 inch wide Signature Series wood range hood cover, so it naturally suits kitchens where that hood body is already specified as the focal point over the range. The product class of chimneys for wood range hoods places it in installations that finish a wood hood stack rather than standalone metal shells, aligning it with custom or semi-custom cabinet layouts. The 23-1/2 inch height works well in spaces with moderate ceiling heights, because it offers enough vertical run for duct coverage while still leaving trimming room for crown or light rails above. Hickory construction supports kitchens built around hickory cabinetry, giving the hood stack a continuous wood grain from hood cover to chimney in both traditional and more contemporary designs. Since it is designed to fit 36 inch wide hoods within a family that also covers 30, 42, and 48 inch sizes, this specific piece targets the common 36 inch cooking zone that appears frequently in residential plans.

Why Cut-To-Size Design Helps Finished Results

The cut-to-size chimney format means the full 23-1/2 inch hickory section ships at a fixed height, and the field crew removes only the amount necessary, which supports precise alignment with ceiling levels that vary from job to job. Having a known maximum height lets designers and installers coordinate hood elevation with wall cabinets and moldings during layout, since they can design around the 23-1/2 inch starting point instead of guessing the available stack length. Because the chimney is tuned to 36 inch wide Signature Series hoods, the width registers directly with the hood body edges, helping keep the vertical lines square and reducing rework during final scribing. The consistent hickory material across the chimney makes sanding, staining, or clear finishing behave similarly to matching hickory components, which streamlines finishing workflows in cabinet shops or on site. Being made in the USA ties the chimney to domestic manufacturing, which can matter on projects prioritizing local sourcing and predictable product standards across multiple installs.

Common Questions About This Signature Chimney

Selecting This 36 Inch Chimney For Your Hood

This 36 inch wall mount chimney for Signature Series range hood covers gives installers a defined hickory solution when finishing a 36 inch wood hood stack. With its 23-1/2 inch cut-to-size height, hickory construction, and Signature Series alignment, it supports predictable layout, coordinated finishing, and consistent appearance from hood body to ceiling on wall mount wood range hood projects.