36" Wall Mount Chimney for Signature Series Range Hood Covers, Cherry

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPRCH36CUF1 to RSRCH36CUF1.

36 Inch Wall Mount Chimney For Signature Hoods

36 inch wall mount chimney describes a cut-to-size cherry chimney built for Signature Series range hood covers, so installers get a dedicated solution instead of adapting generic trim for these wood range hoods. This Omega National Products component sits in the chimneys for wood range hoods class, which keeps it focused on the vertical enclosure above the hood rather than the hood body itself. The 23.5 inch height matches one of the two cut-to-size chimney heights offered for this line, which supports layouts where the vertical run above the hood is limited. The design targets 36 inch wide wood range hoods within a group that also covers 30, 42, and 48 inch widths, so the part aligns with a common cabinet run dimension in many kitchens. Cherry material ties the chimney visually to cherry Signature Series range hood covers, maintaining consistent species across the custom hood assembly.

Key Cherry Chimney Details For Hood Projects

• The cut-to-size chimney format lets installers trim the cherry piece to match the final height needed above the wood range hood, which supports clean terminations at the ceiling line or soffit.
• Design intent for 36 inch wide hoods means this chimney aligns with a standard cooktop and cabinet width, helping maintain proportional sightlines in typical kitchen layouts without reworking adjacent cabinets.
• Availability in a 23.5 inch height gives a defined starting dimension, which simplifies planning when the vertical space between hood and ceiling is known during layout or renovation.
• Fit across Signature Series range hood cover widths of 30, 36, 42, and 48 inches identifies this component as part of a coordinated system, which helps keep hood and chimney profiles visually unified across different cabinet runs.

Chimney Height And Fit For Wall Installations

This Omega National Products cherry chimney is specified at 23.5 inches high for wall mount use, so layout work can start from a known vertical dimension when setting hood elevations. Because it is a cut-to-size design, installers can trim from this 23.5 inch starting height to align the finished chimney with ceilings or upper trim details. Its focus on 36 inch wide hoods places the part directly in the wall area above a standard 36 inch range or cooktop, which is common in many residential kitchens. Being part of the chimneys for wood range hoods category, it is intended to surround the area above the hood cover, supporting a continuous wood profile from hood body to termination.

Using This Signature Series Chimney In The Field

Where This Cherry Chimney Fits Best In Kitchens

This cherry wall mount chimney is specifically designed to work with Signature Series range hood covers, so it fits projects already built around that hood family. The 36 inch width focus pairs naturally with 36 inch wood hoods from the same Signature grouping, which lets the chimney follow the same visual line across the wall. Because the broader cut-to-size chimney range is called out as fitting 30, 36, 42, and 48 inch wide hoods, this part sits within a coordinated system tailored to those common hood spans. In practice, that means the chimney supports installations where the hood assembly becomes a wood focal point in the kitchen while keeping the dimensions tied to standard cabinet planning. Cherry construction matches cherry Signature Series range hood covers, allowing the hood and chimney to read as a single species-specific feature rather than a mixed-wood assembly.

Why Cut-To-Size Design Supports Cleaner Results

The cut-to-size construction of this Omega National Products chimney gives installers a 23.5 inch high cherry component that can be trimmed during installation, which supports tight alignment to ceilings or upper moldings without resorting to field-built fillers. Working from a defined height helps streamline layout, because installers can subtract required cuts from a consistent starting dimension instead of guessing from oversize stock. As part of the chimneys for wood range hoods product class, this piece is intended to complete the vertical run above a Signature Series hood cover, so its role is focused on giving the hood assembly a finished, integrated appearance. The manufacturer part number RCH36CUF1 identifies this exact 36 inch wall mount cherry version, which helps shops and field crews order the same component repeatedly across multiple similar kitchen projects.

Common Questions About This Cherry Range Hood Chimney

Selecting This Chimney For Signature Hood Projects

This Signature Series range hood chimney in cherry offers a 36 inch wall mount solution that matches common hood widths and provides a 23.5 inch cut-to-size height for tailored installations. For projects using Omega National Products Signature Series wood range hood covers, this RCH36CUF1 chimney aligns the vertical run above the hood with the same cherry species and defined dimensions. That combination supports consistent ordering and repeatable field results across similar kitchen layouts.