Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf wood pilaster system gives you four 49-7/8 inch by 0.88 inch pilaster uprights, creating adjustable shelf support over a tall cabinet run. The consistent upright size helps lay out vertical spacing predictably, which simplifies planning for multiple shelf levels. Natural maple construction with a semi-gloss finish provides a clean, finished look that blends into typical cabinet interiors, so the support system does not distract from stored items. This unit holds 90 lbs per shelf, allowing you to use standard cabinet shelf loads with confidence across the uprights. Pilaster uprights work with Rev-A-Shelf wood drawer boxes or drawer boxes you provide, so you can integrate rollout storage into the same vertical system. The design is intended for tall cabinets and can be stacked to reach the desired height, so you can extend the system from base height toward ceiling height within the same cabinet run.
This pilaster system mounts to the cabinet side, so you gain vertical adjustability without occupying shelf surface area. No visible pilaster system holes keep the interior visually clean, while still supporting bracket adjustment along the uprights. The 49-7/8 inch by 0.88 inch uprights fit along tall cabinet sides, giving you continuous support from low to high shelf positions. Patent pending right and left brackets that can be used in the front and back standardize how the load transfers into the side walls. The natural maple semi-gloss finish helps the uprights slide into prefinished cabinet interiors without a raw-wood look, which is useful when the cabinet is already installed. This unit holds 90 lbs per shelf, aligning with many standard cabinet shelf load expectations for kitchen and bath projects.
The 4PIL-50-088-1 pilaster uprights are designed for any tall cabinets, so you can apply one system across pantry-height and other full-height installations. Four 49-7/8 inch by 0.88 inch uprights let you build vertical support on both cabinet sides, which helps keep shelves or compatible drawers square to the opening. The system can be stacked to reach the desired height, so you can continue the same layout beyond a single upright length when cabinets run higher than 49-7/8 inches. Pilaster uprights are compatible with wood drawer boxes from Rev-A-Shelf or drawer boxes you provide, which makes it practical to mix fixed shelves and rollouts within the same tall opening. Natural maple construction with a semi-gloss finish lets the uprights visually tie into common cabinet interiors, which is useful when tall cabinets are used in visible kitchen or bath locations.
Patent pending right and left brackets that can be used in the front and back are designed for easier installation, because one bracket style handles all four mounting positions around a shelf. Five pilaster bracket kits allow you to position support points where needed along the uprights, which helps fine-tune shelf heights for different stored items. No visible pilaster system holes keep the adjustment mechanism concealed, so the sides appear smooth even though the brackets can be repositioned. This unit holds 90 lbs per shelf, providing a defined load rating you can use when deciding where to locate heavier items in a tall cabinet. The wood mounting template simplifies locating the uprights on the cabinet side, which helps repeat hole placement from cabinet to cabinet for consistent results. Mounting directly to the cabinet side uses existing cabinet structure to carry shelf loads, which supports stable performance across the height of the tall cabinet.
The 4PIL-50-088-1 pilaster system provides four 49-7/8 inch by 0.88 inch uprights with five pilaster bracket kits, so you can create multiple adjustable shelf or drawer positions inside a tall cabinet.
The pilaster uprights mount to the cabinet side, using the cabinet structure to carry shelf loads while keeping the interior floor and shelves open for storage and rollout hardware.
This pilaster system is designed for any tall cabinets, so it can be applied in pantry-height or other full-height cabinet installations that benefit from adjustable shelf or drawer support.
The 90 lbs per shelf rating gives a defined capacity for each supported shelf, helping you plan the number of shelves and what stored items each level will carry in a tall cabinet.
The patent pending right and left brackets can be used in the front and back, so one bracket design works in all positions, streamlining installation and layout around each shelf or drawer.
The natural maple semi-gloss finish lets the uprights match many cabinet interiors, so the support system blends visually while still providing structural support for shelves and drawers.
The Rev-A-Shelf wood pilaster system gives you four 49-7/8 inch by 0.88 inch uprights, five pilaster bracket kits, and a wood mounting template to support tall cabinet layouts. Natural maple construction with a semi-gloss finish matches common interiors, while the 90 lbs per shelf rating supports typical storage use. Patent pending right and left brackets that work front and back streamline installation and later adjustments across multiple shelves or drawer boxes. For tall cabinets needing adjustable storage using pilaster uprights, this 4PIL-50-088-1 system provides a consistent approach from cabinet base toward full height.
Sold In: 1 Set
