Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf wood pilaster system is a natural maple pilaster upright and bracket setup that creates adjustable shelf or drawer support in cabinet interiors. The four pilaster uprights measure 57-7/16 inches long by 1-1/8 inches wide, so they span tall cabinet sections in one run and give you consistent spacing from top to bottom. Width is trimmable down to 7/8 inch, letting you fine-tune the fit to existing cabinet sides without redesigning the casework. The natural maple construction with semi-gloss finish gives a clean look inside the cabinet while matching common maple interiors. This unit holds 90 lbs per shelf, so drawers or shelves stay functional for typical kitchen and tall cabinet storage. The system is designed for any tall cabinets and can be stacked to reach the desired height, which helps on pantry-height or utility runs.
The pilaster uprights mount to the cabinet side, letting the system tie directly into the cabinet box rather than the face frame, which stabilizes the load along the full pilaster length. The patent pending right and left brackets can be used in the front and back, so you can run support hardware on both cabinet sides without changing bracket types. The width is trimmable down to 7/8 inch, which matters when cabinet interiors vary slightly and you need each pilaster to sit flush without binding against face edges. The design is compatible with wood drawer boxes from Rev-A-Shelf Corporation or user-provided boxes, so you can integrate existing drawers or new shop-built boxes onto the same pilaster track.
This base cabinetry organizers and fillers pilaster system is designed for any tall cabinets, so it fits pantry-height or utility-height interior spaces where multiple pull-out levels are needed. The four 57-7/16 inch pilaster uprights can be stacked to reach the desired height, letting you cover taller runs without switching to a different system size. Because the pilaster uprights mount to the cabinet side, they work in both base and wall cabinet pull-out layouts where side panels are accessible. The system is compatible with wood drawer boxes from Rev-A-Shelf or user-provided boxes, letting installers standardize on existing drawer box construction while still benefiting from the pilaster adjustment track.
The width trimmable down to 7/8 inch helps installers dial in side-to-side placement so the pilaster sits straight and the drawer boxes track smoothly from top to bottom. No visible pilaster system holes means the adjustment pattern stays hidden behind the drawer hardware, which keeps finished interiors looking uniform when cabinets are open. Patent pending right and left brackets that can be used in the front and back reduce part sorting on site, because the same bracket pair handles both positions and helps keep spacing identical on each side. The natural maple construction with semi-gloss finish provides a stable surface that works well with typical interior cabinet environments. This unit holds 90 lbs per shelf, so each supported level can carry everyday tall cabinet storage without overloading the rated capacity, which is important when spacing multiple shelves or drawers on one pilaster run.
Each pilaster upright measures 57-7/16 inches long by 1-1/8 inches wide, so it spans tall cabinet interiors while staying narrow enough to fit along the cabinet sides.
The pilaster uprights have a width trimmable down to 7/8 inch, allowing fine adjustment against cabinet sides when interior clearances are tight or slightly out of square.
This unit holds 90 lbs per shelf, providing capacity for typical tall cabinet storage loads while helping keep drawer or shelf hardware within the rated working range.
The pilaster uprights mount to the cabinet side, tying the load path directly into the side panels and supporting drawer boxes or shelves along the full upright length.
The system is designed for any tall cabinets and can be stacked to reach the desired height, so it adapts to pantry-height or utility-height cabinet interiors.
The pilaster uprights are compatible with wood drawer boxes from Rev-A-Shelf Corporation or user-provided boxes, so they integrate into various drawer box construction approaches.
Rev-A-Shelf wood pilaster uprights, natural maple construction, and patent pending right and left brackets give you an adjustable support system tailored to tall cabinets. Use the trimmable width, 90 lbs per shelf rating, and stackable 57-7/16 inch uprights to build organized interior pull-out or drawer layouts that match your cabinet dimensions.
Sold In: 1 Set
