(4) 57-7/16" x 2-3/8" Wood Pilaster System Uprights 6 Pilaster Hardware Sets

Rev-A-Shelf Wood Pilaster System For Tall Cabinets

Rev-A-Shelf wood pilaster system provides four 57-7/16 inch by 2-3/8 inch wood pilaster uprights so you can build adjustable shelving or pull-out systems inside tall cabinets using a consistent, repeatable layout. The natural maple construction with semi-gloss finish offers a cabinet-grade appearance that matches many custom interiors, helping projects look intentional rather than improvised. Width is trimmable down to 7/8 inch, which lets you fit the uprights precisely to tight openings or narrow fillers without redesigning the cabinet. The design creates no visible pilaster system holes on the cabinet face, keeping the interior visually clean when doors are open. This unit holds 90 lbs per shelf, giving you the capacity needed for typical pantry goods or bathroom items while staying within a documented load rating. Pilaster uprights only are compatible with wood drawer boxes from Rev-A-Shelf or boxes you provide, so the uprights become a flexible framework around your chosen drawer solution.

Key Pilaster Details That Support Cabinet Projects

• Four 57-7/16 inch by 2-3/8 inch pilaster uprights give you a matched set of vertical supports, which simplifies laying out multiple shelves or pull-outs at the same height across a cabinet run.
• Width trimmable down to 7/8 inch allows on-site sizing, so installers can adapt to actual cabinet openings or fillers and still keep the uprights centered and aligned.
• No visible pilaster system holes means the adjustment hardware stays concealed, which is important for kitchen and bath cabinetry where open-door appearance matters to clients.
• Natural maple construction with semi-gloss finish delivers a finished interior look, so the uprights can be left exposed in tall cabinets without needing additional finishing steps.
• This unit holds 90 lbs per shelf, giving designers and installers a clear working load reference when planning shelf spacing, drawer box size, and product placement.
• Designed for any tall cabinets, the system supports use across pantry, linen, or utility applications while keeping a single pilaster standard on the truck.

Installation And Trimmable Fit For Cabinet Interiors

The pilaster uprights mount to the cabinet side, so the load transfers directly into the cabinet structure and keeps the interior floor free for other components. Width trimmable down to 7/8 inch lets you cut the uprights to match narrow stiles or side clearances, helping retrofit work in existing cabinetry. Patent pending right and left brackets that can be used in the front and back support easier installation, because the same bracket style can be mirrored rather than sorted. The pilasters can be stacked to reach the desired height, which matters in very tall cabinets where one upright length is not enough. A wood mounting template is provided, giving a physical layout guide so bracket and pilaster locations repeat from cabinet to cabinet.

Using The Pilaster Uprights In Tall Cabinet Layouts

Where These Pilaster Uprights Work Best

The system is designed for any tall cabinets, so it suits pantry, linen, or tall utility runs that benefit from adjustable pull-outs or shelves. Four 57-7/16 inch by 2-3/8 inch uprights allow you to set up vertical tracks on both sides of a single tall opening or across multiple openings when the design calls for matched heights. Pilaster uprights only are compatible with wood drawer boxes from Rev-A-Shelf or with boxes you provide, so the same uprights can support factory drawers on one job and shop-built boxes on another. Natural maple construction with a semi-gloss finish blends into many cabinet interiors, which helps when projects use maple or light-colored boxes and shelving. Because the uprights mount to the cabinet side, they preserve center space for wider drawer boxes or storage, supporting efficient use of interior width.

Details That Support Repeatable Alignment And Load

Width trimmable down to 7/8 inch gives you control over the exact footprint of each upright, which helps keep drawer boxes parallel and centered even when cabinet openings vary slightly. Patent pending right and left brackets usable in the front and back simplify layout, because the same bracket forms both front and rear supports without extra part numbers. No visible pilaster system holes means height adjustments happen along the pilaster while the cabinet face remains clean, which benefits higher-end kitchen and bath work. The ability to stack pilasters to reach the desired height lets you continue the same adjustment pattern in extra-tall cabinets, keeping bracket spacing consistent from floor to ceiling. This unit holds 90 lbs per shelf, so you can size pantry pull-outs, bathroom storage, or tall cabinet shelves knowing the uprights and brackets are rated for typical residential loads.

Common Questions About The Rev-A-Shelf Pilaster System

Select This Pilaster System For Tall Cabinet Projects

The Rev-A-Shelf wood pilaster system with four 57-7/16 inch by 2-3/8 inch uprights gives installers a structured way to build adjustable storage in tall cabinets. Trimmable width down to 7/8 inch, cabinet-side mounting, and brackets usable front and back streamline layout work in the shop or on site. Natural maple construction with semi-gloss finish and no visible pilaster system holes supports clean interior aesthetics, while a 90 lbs per shelf rating keeps tall cabinet storage within a documented load capacity. For projects using Rev-A-Shelf or shop-built wood drawer boxes, this pilaster uprights only system provides a flexible framework for pantry, bath, or utility layouts.