Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Amerock #6 x 5/8-inch oval head machine screw in Machine Brass is a hardware installation screw sized and finished to complement decorative cabinet hardware. Its raised dome head sits above the surface after installation, adding a polished visual detail rather than disappearing into the door or drawer front.
This screw is designed for mounting decorative cabinet hardware where the fastener head will be visible from the front of the door or drawer. An oval head countersinks into a matching countersink but leaves the rounded dome proud of the surface, so it reads as a finished element rather than a flaw to conceal. That makes it the right choice for switch plates, hinge face-covers, escutcheons, and any cabinet hardware application where a flush or sub-flush head would look out of place. The 5/8-inch length suits standard door and drawer front stock without protruding through thinner material.
The Machine Brass finish is applied over a steel core, pairing the warmth of a brass tone with the structural reliability of steel. When hardware across the kitchen or bath is specified in Machine Brass, matching the installation screws to that finish keeps every visible detail consistent. Exposed screw heads in a mismatched finish can undercut an otherwise carefully specified hardware scheme, and this screw eliminates that risk on any surface where the head will show. It is an interior fastener suited to dry, climate-controlled environments.
Cabinet installers who specify Amerock hardware in warm brass tones will reach for this screw to close out an installation without a visible finish mismatch. Designers sourcing hardware packages can include matching screws in the specification from the start. Homeowners replacing pulls or knobs on existing cabinetry get the same benefit: the screw head blends with the hardware rather than drawing the eye. It is a small detail that matters most in high-visibility applications like glass-door cabinets, open shelving hardware, and furniture with exposed fastener heads.
No. An oval head countersinks into a matching countersink below the surface but leaves the rounded dome above the material. That dome is the intentional visible element of this head style.
Yes, provided the hardware mounting hole is sized for a #6 shank and the finish coordinates with the Machine Brass tone. The screw itself is not hardware-specific.
This is an interior installation screw. For outdoor applications, a screw with a rated exterior finish is the right choice.
A standard #2 Phillips bit drives this screw. No specialty bit is required.
Fine thread provides more thread-per-inch contact in metal hardware, tapped holes, and thin mounting stock, which reduces the chance of stripping when the screw is seated and retightened over time.
When the hardware finish is Machine Brass, the installation screw should be too. This Amerock oval head screw handles the fastening job while keeping every visible detail of the installation consistent.