Waste container pullout frame only defines this Kessebohmer USA Inc bottom mount trash pullout as the structural frame that carries trash bins on soft-open and soft-close slides, which matters when planning a clean, concealed waste solution inside a base cabinet. The frame is designed for 15 inch base cabinets, so it fits common kitchen layouts where installers need a predictable footprint. A frame size of 12.25 inches wide, 22 inches deep, and 10 inches high sets clear boundaries inside the cabinet, helping with layout around plumbing or other hardware. The 100 lb load rating supports the combined weight of two 28QT bins and contents, which matters for daily use in busy kitchens. The champagne finish aligns with modern kitchen hardware colors, helping maintain a consistent interior look across cabinet components.
This bottom mount trash pullout frame is built as a structural base that fastens to the cabinet floor, so the load path runs directly into the bottom panel, which helps when cabinets handle repeated heavy waste loads. The soft-open function in the slides starts movement smoothly as the door and frame are pulled, which reduces shock on fasteners and cabinet sides during frequent use. The soft-close function controls the final travel of the frame, bringing the bins back into the cabinet gently, which reduces noise and helps maintain alignment over time. With a fixed 12.25 inch width sized for 15 inch base cabinets, installers can plan clearances confidently around door hinges, face frames, and adjacent pullouts in the same run.
This Kessebohmer waste container pullout frame is designed for 15 inch base cabinets, making it suitable for standard kitchen base openings where space is dedicated to trash. The 12.25 inch frame width allows it to sit behind typical 15 inch fronts while leaving practical side clearances inside the box. A depth of 22 inches lets the frame use much of the cabinet interior, which increases usable bin volume without extending beyond common cabinet depths. The 10 inch height keeps the structure low, allowing 28QT bins to sit securely while maintaining overhead space inside the cabinet for the containers themselves. By centering on 2 x 28QT bins, the frame supports a two-stream waste setup, which suits layouts that separate trash and recycling within the same opening.
The integrated soft-open and soft-close slides in this waste container pullout frame manage the motion path from fully closed to fully extended, which supports consistent travel even under higher loads up to the 100 lb rating. Because the system is bottom mounted, alignment begins at the cabinet floor, helping shops create jigs or standard drill patterns for repeat installations across multiple cabinets. The 22 inch depth works with the slides to provide a long extension path, which improves bin access at the front of the cabinet during emptying and bag changes. The 100 lb load rating defines the working envelope for the frame and slides, giving builders a predictable performance point when positioning this unit in higher-traffic kitchen zones. The champagne finish on the frame parts supports a clean look that helps installed jobs present well during handover, especially where clients will see cabinet interiors regularly.
This waste container pullout frame only is designed for 15 inch base cabinets, so it fits standard base openings commonly planned for trash in kitchen layouts.
The frame size is 12.25 inches wide, 22 inches deep, and 10 inches high, which defines the footprint available inside the cabinet for fitting around hinges or plumbing.
The waste pullout frame has a 100 lb load rating, so it is built to support two 28QT bins and contents in everyday residential or light commercial use.
The frame is designed for 2 x 28QT bins, which sets up a two-container arrangement suited to separating trash and recycling within a single base cabinet.
The integrated soft-open and soft-close slides guide the frame smoothly in and out, which reduces impact on the cabinet and promotes quiet, controlled movement under load.
The frame has a champagne finish, providing a neutral metallic tone that coordinates with many interior cabinet hardware finishes in modern installations.
This Kessebohmer bottom mount trash pullout frame with soft-open and soft-close slides is built for 15 inch base cabinets, so it suits projects needing a defined 12.25 inch by 22 inch by 10 inch footprint. The 100 lb load rating and design for 2 x 28QT bins provide clear capacity planning for kitchen waste stations. The champagne finish supports a coordinated interior look alongside other cabinet hardware. For projects that standardize on this specification, the pallet quantity of 16 frames per pallet helps shops and contractors equip multiple bases with the same waste solution.
Sold In: 1 Pallet