
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Kessebohmer waste container pullout frame gives a 15 inch base cabinet a dedicated slide-out frame for waste bins, so the interior space turns into an organized pullout zone instead of a fixed shelf. The frame is designed for two 28 quart containers, which sets the overall footprint for waste capacity and helps with planning cabinet layouts around sink plumbing or drawers. With a load rating of 100 lbs, the frame supports typical residential waste and recycling loads without overpowering the slides, which matters when the cabinet sits in a heavy-use kitchen. The frame size of 12.25 inches wide, 22 inches deep, and 10 inches high defines the opening and interior space the assembly occupies, so the cabinet front and surrounding storage can be planned accurately. An anthracite finish gives the metal frame a dark, uniform look that blends into modern cabinet interiors and keeps the pullout visually consistent when the door is opened.
This bottom mount trash pullout frame installs to the cabinet floor, so the load is carried by the cabinet bottom rather than the sidewalls, which simplifies layout in many face-frame and frameless boxes. The frame size of 12.25 inches wide guides lateral placement on the cabinet floor, giving predictable clearances to side panels and face-frame stiles. A 22 inch depth means the slides run nearly the full depth of standard base cabinets, so the pullout travel brings the waste containers forward where they are easy to access. With a height of 10 inches, the frame occupies a modest vertical space, leaving room above for the two 28 quart containers and any door-mount connection chosen by the shop, which helps coordinate with adjacent drawers or under-sink fixtures.
This bottom mount trash pullout frame is designed for 15 inch base cabinets, so it drops naturally into that standard cabinet width in new builds or remodels. The 12.25 inch wide frame works inside the carcass while leaving clearance to side panels or face frames, which matters when aligning doors and neighboring drawers. With a 22 inch depth, the pullout uses typical base cabinet interior depth effectively, reaching back near the cabinet rear without wasting space. A 10 inch high frame profile positions the support under the two 28 quart containers, so the bins sit securely while still leaving overhead clearance in most base cabinets. The design for two 28 quart containers helps organize waste and recycling within a single opening, giving predictable capacity for kitchen workflow. An anthracite finish ties visually into dark interiors, so the hardware supports a consistent cabinet appearance when the pullout is extended in open-concept kitchens.
The frame uses soft-open and soft-close slides, so the pullout transitions gently at the start and end of travel, which reduces abrupt movement when the cabinet door is pulled. This motion control protects the frame and cabinet from hard slams, which matters when containers are loaded close to the 100 lbs rating. A 100 lbs load capacity also means the soft-close mechanism still functions under typical daily loads, so the motion remains controlled over time. By matching the frame dimensions of 12.25 inches wide, 22 inches deep, and 10 inches high to the slide hardware, the assembly moves as a single unit, which supports predictable alignment for custom fronts or applied doors. The dedicated design for two 28 quart containers keeps weight distribution centered over the slides, helping the soft-close feature operate consistently in repeated opening cycles.
This waste container pullout frame is designed for 15 inch base cabinets, so it suits that specific cabinet opening in kitchen runs.
The pullout frame has a load rating of 100 lbs, so it handles typical waste and recycling loads for the two 28 quart containers.
The frame size is 12.25 inches wide, 22 inches deep, and 10 inches high, which defines the footprint needed on the cabinet floor.
The frame is designed for two 28 quart containers, giving a defined capacity and layout for waste and recycling inside the cabinet.
The waste container pullout frame has an anthracite finish, so it presents a dark, uniform appearance inside the cabinet.
The frame is from Kessebohmer USA Inc with manufacturer part number 2507629846, which ties directly to this specific bottom mount trash pullout.
This soft-open, soft-close bottom mount trash pullout frame from Kessebohmer USA Inc pairs a 15 inch base cabinet with a defined waste solution, so cabinet openings can be planned confidently around trash and recycling. The frame dimensions of 12.25 inches wide, 22 inches deep, and 10 inches high, combined with the 100 lbs load rating, create a straightforward spec for shop drawings and field layout. The design for two 28 quart containers and the anthracite finish round out the functional and visual role of the pullout inside the cabinet. For projects calling for a dedicated waste center in a 15 inch base cabinet, this frame offers a clear, measurable way to integrate a pullout into the run.
Sold In: 1 Pallet