Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Chadwood wall cabinet gives you a 24 inch wide, 18 inch high, 12 inch deep wall unit that suits standard upper cabinet layouts and keeps dimensions predictable across a run. The recessed panel style matches the Kitchen Kompact Chadwood door design, so this cabinet aligns visually with other Chadwood pieces in the same project. Door frames use mortised and tenoned construction in solid 3/4 inch oak, creating a jointed frame that holds the flat panel securely during everyday door use. Solid wood corner blocks are glued and power nailed, tying the cabinet box together at key stress points so the case stays square after hanging. The flat panel plywood insert is a three-ply panel with a rotary cut red oak veneer face, providing a real-wood appearance that takes stain consistently with the solid oak frame. Solid wood hanging strips located on the top and bottom give defined mounting zones along the length of the cabinet, helping the load transfer into the wall structure.
This Kitchen Kompact wall cabinet uses solid wood hanging strips at both the top and bottom, giving two structural rails where installers can locate fasteners into wall studs while the cabinet is supported. The cabinet size of 24 inches wide by 18 inches high by 12 inches deep fits typical upper runs where a shorter height is needed above work areas. Mortised and tenoned solid oak door frames keep the door panel captured while the concealed, self-closing hinges handle daily opening and closing without exposed hinge barrels. The three-ply flat panel with red oak veneer face works together with the four-step stain, sealer, sanding, and catalyzed top coat process to create a uniform finish across the frame and panel, so the door surface reads as one matched front once installed in a run of Chadwood cabinets.
The Kitchen Kompact CW24Y cabinet, at 24 inches wide, 18 inches high, and 12 inches deep, suits upper wall positions where a shorter height is preferred, such as over counters or work areas that need more vertical clearance. The recessed panel Chadwood styling, with a flat panel plywood insert and rotary cut red oak veneer face, ties visually to other Kitchen Kompact Chadwood components, helping projects keep a consistent door and drawer front look across the entire kitchen. Solid 3/4 inch oak door frames with mortised and tenoned joints support the recessed panel design, so each door maintains its shape while handling regular use. Inside the cabinet, adjustable shelves give flexibility, allowing the installer or end user to set shelf elevation to fit dishes, glassware, or pantry items within the 12 inch deep interior space. Solid wood corner blocks that are glued and power nailed help this wall cabinet hold its geometry when ganged with adjacent units along a wall.
Solid wood hanging strips at the top and bottom of the cabinet provide defined fastening zones, which lets installers tie the 24 inch wide cabinet into wall framing along solid lumber rather than thin material. These hanging strips work together with the corner blocks to keep the case aligned when multiple cabinets are leveled and fastened side by side. The door system uses concealed, self-closing hinges, so alignment adjustments can be made using the hinge hardware while keeping hinge barrels hidden from the front, supporting a clean Chadwood appearance once doors are set. The flat panel plywood insert, built as a three-ply panel with a rotary cut red oak veneer face, takes the stain and sealer system in the same way as the solid 3/4 inch oak frame, reducing visual variation between frame and panel. The four-step finish process of stain, sealer, sanding, and catalyzed top coat results in a coated surface that is prepared to handle normal kitchen humidity and handling on a daily basis.
The Kitchen Kompact CW24Y Chadwood wall cabinet is 24 inches wide, 18 inches high, and 12 inches deep, which suits standard upper cabinet layouts and shorter wall runs.
The cabinet doors use mortised and tenoned solid 3/4 inch oak frames around a flat panel plywood insert, giving a jointed wood frame that holds the recessed panel securely.
The recessed door uses a flat panel plywood insert made as a three-ply panel with a rotary cut red oak veneer face, providing a real-wood grain surface for the finish system.
The wall cabinet has solid wood hanging strips on the top and bottom, giving continuous solid members where fasteners can be driven into wall framing during installation.
The cabinet uses a four-step process of stain, sealer, sanding, and catalyzed top coat, producing a finished surface suited to normal kitchen environments.
The cabinet doors use concealed, self-closing hinges, so the hinges are hidden from the front and pull the doors closed at the end of their swing.
The Kitchen Kompact Chadwood wall cabinet in the CW24Y size pairs a 24 inch width, 18 inch height, and 12 inch depth with solid 3/4 inch oak door frames, three-ply red oak veneer panels, and concealed self-closing hinges. Solid wood corner blocks and hanging strips support stable mounting when this cabinet is joined with other Kitchen Kompact units along a wall. Adjustable shelves and the four-step stain, sealer, sanding, and catalyzed top coat finish create a usable interior and finished exterior that align with the Chadwood style. For projects built around Kitchen Kompact Chadwood fronts, this wall cabinet size provides a straightforward way to fill shorter upper positions while keeping construction, finish, and appearance consistent.
Sold In: 1 Each