Hickory Hardware Tranquility Lancaster Hand Polished and White 1-1/8" (29 mm) Diameter Knob, P709-W

Hickory Hardware Tranquility Knob For Cabinets

Hickory Hardware Tranquility knob identifies this piece as part of the Tranquility Series, giving installers a defined style family when matching existing hardware runs. The knob is a 1-1/8 inch, or 29 mm, diameter pull, so it suits standard cabinet doors and drawers where a compact hand grip is needed. Its material is ceramic, which provides a smooth, hard surface that feels solid when operated on frequently used fronts. The finish is Lancaster hand polished and white, combining a metal-look base tone with a white body that supports mixed-material cabinet designs. The projection is 7/8 inch, setting the knob off the surface enough for finger clearance while keeping the profile tight on narrow face frames. A 3/8 inch base concentrates the bearing area, which helps the knob seat cleanly on cabinet faces during installation.

Key Tranquility Series Knob Details For Projects

• The 1-1/8 inch diameter head offers a familiar pull size, which helps maintain consistent ergonomics across cabinet rows in kitchens or shops.
• The 7/8 inch projection defines stand-off from the door, giving reliable finger access without catching on nearby edges or adjacent fronts.
• The 1-1/8 inch width matches its diameter, so the knob presents a balanced circular footprint that aligns neatly on both narrow and wide rails.
• The 3/8 inch base gives a smaller contact circle, allowing precise centering on stile layouts and making layout marks easy to hide under the base.
• The Lancaster hand polished and white finish delivers a two-tone look, which supports design transitions between warm brass tones and clean white cabinetry.

Cabinet Knob Fit, Diameter, And Mounting Use

This ceramic cabinet knob uses an 8-32 thread size, so it matches standard cabinet knob screw threads for face-frame and frameless applications. The 1 inch screw length cited for this knob aligns with common 3/4 inch door and drawer front thicknesses, helping installers achieve full thread engagement through a single panel. With a 1-1/8 inch diameter and 7/8 inch projection, the knob balances hand clearance and compact scale, which is useful on tight drawer banks. The 3/8 inch base focuses contact near the mounting hole, aiding in firm seating against flat cabinet surfaces. Being part of the Tranquility Series, this P709-W knob supports coordinated layouts where consistent style and dimensions streamline planning.

Using This Ceramic Knob In Real Cabinet Work

Where The P709-W Knob Performs Best

The P709-W knob from the Tranquility Series is built as a 1-1/8 inch diameter cabinet knob, which suits typical kitchen, bath, and built-in cabinetry where standard-size pulls are specified. Its ceramic material supports use on frequently handled doors and drawers by providing a hard, non-porous gripping surface. The Lancaster hand polished and white finish positions this knob for installations that mix traditional metal tones with clean white faces, so runs of doors and drawers can share a unified visual line. With a 7/8 inch projection, the knob stands off enough for a comfortable pinch grip on upper and lower fronts without extending excessively into walkways. The 3/8 inch base allows the knob to sit neatly on face frames and slab fronts, keeping the visual footprint restrained while still covering the mounting bore.

Details That Support Repeatable Cabinet Installations

The P709-W knob uses an 8-32 screw interface, giving installers a familiar thread that coordinates with standard cabinet drilling and hardware jigs. A 1 inch screw length specification pairs well with many 3/4 inch thick doors and drawer fronts, promoting consistent clamp-up without bottoming threads prematurely. The 1-1/8 inch head diameter provides a clear target during layout, which helps align knobs in straight rows on drawer stacks and rail centers. Its 7/8 inch projection works with common cabinet face geometries so pulls do not conflict with crown, edge profiles, or adjacent hardware. The ceramic construction and Lancaster hand polished and white finish combine a tactile grip with a defined style cue, which supports repeat orders when matching or expanding an existing Tranquility Series installation. Together, these details give shops and installers predictable results from drilling through final fit.

Common Questions About The P709-W Tranquility Knob

Selecting This Knob For Cabinet Runs

The ceramic P709-W Tranquility Series knob combines a 1-1/8 inch diameter, 7/8 inch projection, and 3/8 inch base with an 8-32 thread interface, giving installers standard dimensions and threading for cabinet work. The Lancaster hand polished and white finish and Belwith Keeler branding provide a clear style and source reference when specifying knobs for coordinated doors and drawers. For projects that call for a compact, ceramic cabinet knob with these dimensions and finish, this model offers a defined, repeatable choice for future runs.