Hickory Hardware Cottage Polished Brass 1-1/4" (32 mm) Diameter Knob, P771-3

Hickory Hardware Cottage Series Knob For Cabinets

Hickory Hardware Cottage Series knob gives you a 1-1/4 inch diameter pull point that feels familiar on doors and drawers, which helps keep cabinet layouts consistent across a run. The Tranquility collection identity ties this knob to a known Belwith Keeler design family, so matching other Tranquility pieces on the same job stays straightforward. The zinc die cast material creates a solid-feeling knob body, which supports repeat use on high-touch fronts in kitchens or shops. Its polished brass finish brings a bright metallic surface, which visually stands out on painted or stained cabinetry where clear hardware location is important. A 1 inch projection sets the hand clearance off the face, which gives fingers room without pulling the knob too far into walkways. The 3/4 inch base diameter seats the knob on the panel, which helps spread contact where the knob meets the door or drawer front.

Key Tranquility Knob Details For Cabinet Work

• The 1-1/4 inch diameter knob defines a predictable grip size, which helps installers line up multiple knobs on wide drawer banks without crowding edges.
• The zinc die cast material forms a dense knob body, which supports a solid-feeling pull when opening heavier cabinet doors in everyday use.
• The polished brass finish creates a bright reflective face, which makes knob locations easy to spot under variable shop or kitchen lighting.
• The 1 inch projection spaces the knob off the surface, which leaves practical finger clearance while keeping the pull point close to the cabinet face.
• The 3/4 inch base diameter sets a defined footprint on the panel, which helps cover typical drilled hole edges and gives a neat transition to the door or drawer.
• The 1-1/4 inch overall width measurement coordinates with the listed diameter, which simplifies layout when mixing this knob with other 1-1/4 inch pulls.

Installation Dimensions And Screw Size Details

The specified 8-32 x 1 inch screw size pairs with the knob body, which lets installers tap into existing 8-32 drilled drawer fronts or doors without changing thread standards. The 1-1/4 inch diameter works with common drilling patterns, which keeps centerline measurements simple during cabinet layout. A 1 inch projection defines stand-off from the surface, which helps installers visualize clearances relative to face frames or adjacent doors. The 3/4 inch base diameter identifies the contact ring against the panel, which is useful when planning knob placement away from inside edges or profiles. The Belwith Keeler manufacturer part P771-3 labels this exact configuration, which supports repeat ordering when matching hardware across multiple rooms or future phases.

Using This Polished Brass Knob In Real Projects

Where This Polished Brass Knob Fits Best

This polished brass 1-1/4 inch diameter knob suits cabinet and drawer fronts where a round pull is preferred, because the listed diameter offers a balanced feel on standard door rails and drawer fronts. The Tranquility collection designation ties it to a specific decor style, which helps when coordinating hinges or other visible hardware from the same design family. The polished brass finish makes sense on projects calling for a bright metallic accent, since the finish creates a clear contrast against painted and stained wood surfaces. The 1 inch projection aligns naturally with typical cabinet door thicknesses, so the knob sits out far enough for a confident grip without extending excessively past the face. With a 3/4 inch base diameter, the knob works well on flat-panel and simple profile doors, because the base fits comfortably inside most rail widths and panel details.

Details That Support Repeatable Cabinet Installations

The specified 1-1/4 inch diameter and 1 inch projection give installers fixed reference numbers, which simplifies drilling jigs and layout blocks for repeat runs of doors and drawers. The 3/4 inch base diameter offers a consistent bearing surface against the panel, which helps the knob seat square when tightened and reduces fiddling during alignment. The zinc die cast material keeps each knob formed to the same pattern, which supports uniform appearance across large cabinet installations. The 8-32 x 1 inch screw size uses a standard cabinet thread, so installers can work with familiar bits and drivers while setting hardware. The Belwith Keeler part number P771-3 clearly marks this exact knob, which allows shops and contractors to re-order the same hardware for add-on cabinets or later remodel phases without re-measuring installed pieces.

Common Questions About The Tranquility Brass Knob

Selecting This Knob For Your Next Cabinet Run

The Hickory Hardware Cottage Series polished brass 1-1/4 inch diameter knob from the Tranquility collection combines a zinc die cast body, 1 inch projection, and 3/4 inch base diameter, which all translate into predictable drilling, clean seating, and consistent appearance across cabinet installations.