Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Binks air hose assembly is a 50 foot EPDM air hose with a 1/4 inch NPS connection, built for spray finishing and rugged industrial air supply. The 250 psi working pressure handles typical spray gun and air tool demands, so one hose serves many shop air tasks. The smooth red EPDM cover cleans off easily, keeping overspray and shop dust from sticking and affecting hose handling. Class B oil resistance means the hose tolerates lubricants in the airline and oily environments, so it keeps performance when oil and grease are present around finishing equipment. The EPDM tube is designed for use with air, water, and water-based materials, giving flexibility across finishing and cleaning workflows. High tensile strength spiral reinforcement maintains flexibility under pressure while holding coupling retention, which helps reduce kinks while keeping fittings secure in daily use.
This Binks air hose assembly uses a 1/4 inch NPS threaded connection, which gives a defined thread standard for tying into spray guns, regulators, or manifold ports. The three-piece reusable brass connection allows the end fitting to be assembled onto the hose, supporting coupling retention during service. The spiral reinforcement is designed to keep the hose flexible even when pressurized, so routing around booths or fixtures remains manageable during installation and repositioning. The smooth cover slides over surfaces instead of grabbing, which helps when pulling hose along floors or around parts during layout and setup.
This air hose assembly is described as a premium spray finishing air hose, so it is intended for spray guns and finishing tools that depend on stable air supply. It is designed for all finishing operations, which covers a range of coating tasks from smaller parts to larger panels in a shop. The hose is also described for rugged industrial applications, so it suits environments where hoses encounter abrasion and frequent movement around equipment. Class B oil resistance supports applications requiring lubricants in the airline supply, so lubricated air tools and oiled regulators can operate without degrading the hose tube. The hose is also described as excellent for use with water and water-based materials, letting the same line support waterborne coatings or washdown tasks as part of a finishing workflow.
The 250 psi working pressure rating provides headroom for typical spray finishing pressures, so the hose maintains structure without ballooning, which supports consistent air delivery to the spray gun. The EPDM tube with high tensile strength spiral reinforcement is specially designed for maximum flexibility under pressure, so kinks and sharp bends are reduced, helping maintain steady flow during gun movement. Maximum coupling retention is built into the reinforcement and brass connections, which keeps hose ends secure and helps avoid unplanned disconnections during spraying. The temperature range from -40 F to +200 F allows the hose to stay usable across cold shops and warmer operations, so flexibility and performance hold across seasonal conditions. The oil-resistant, abrasion-resistant, smooth red cover helps the hose handle constant dragging and contact with equipment, which supports long service while keeping outside buildup from interfering with hose handling and positioning.
The Binks 71-1356 air hose assembly is 50 feet long, giving reach across spray booths or work areas so spray finishing and industrial tools can move around larger parts without relocating air sources.
This air hose uses a 1/4 inch NPS threaded connection, which provides a defined interface for spray guns, regulators, or manifolds that accept this standard thread size in air systems.
The Binks air hose assembly has a 250 psi working pressure rating, so it supports typical spray finishing pressures and industrial air demands while maintaining hose structure in use.
This air hose uses an EPDM tube with Class B oil resistance and an oil-resistant cover, so it is intended for environments with lubricants in the airline or oil and grease present.
The hose is described as excellent for use with water and water-based materials, so it supports waterborne coatings or water-based tasks as part of finishing operations.
This Binks air hose assembly has a temperature range from -40 F to +200 F, so it remains functional across cold shop conditions and warmer industrial environments.
The Binks 71-1356 air hose assembly combines a 50 foot length, 1/4 inch NPS connection, and 250 psi working pressure to support spray finishing and industrial air supply. EPDM Class B oil resistance, spiral reinforcement, and an abrasion-resistant smooth red cover align with shops handling lubricated air, water-based materials, and frequent hose movement. For finishing operations and rugged industrial environments that depend on stable air delivery, this Binks air hose is built to integrate into existing 1/4 inch NPS air systems.
Sold In: 1 Each