Binks 71-1105 air hose 25 ft 1/4 in 250 psi

Binks 71-1105 Air Hose For Spray Finishing

Binks 71-1105 air hose is a 25 ft air hose assembly with a 1/4 inch inside diameter, so it delivers air over a typical booth or shop distance while keeping flow suited to spray finishing work. The hose is described as a premium spray finishing air hose, which positions it for consistent performance in finishing operations rather than general shop air tasks. A high working pressure rating of 250 psi supports use in finishing operations and rugged industrial applications where line pressure runs high. The hose uses a tube made from EPDM with Class B oil resistance, which helps it handle environments where oil and lubricants are present in the airline supply. The cover is also EPDM, red, and smooth, which helps cleaning and visual identification in busy work areas. The design is stated as excellent for use with water and water-based materials in finishing setups.

Key Air Hose Details For Finishing Pros

• The 25 ft length with 1/4 inch inside diameter supports spray finishing runs where compact hose routing helps control gun handling and reduces clutter in the spray area.
• The high working pressure rating of 250 psi allows the hose to serve finishing operations and rugged industrial applications where regulators and tools demand a stable, higher-pressure air supply.
• The tube made of EPDM with Class B oil resistance helps the hose perform in systems using lubricants in the airline supply or areas where oil and grease are present, reducing hose performance issues in these environments.
• The EPDM red smooth cover is abrasion resistant and smooth, which helps the hose resist wear against surfaces while also allowing easier cleaning in finishing spaces exposed to overspray and dust.
• The hose is described as excellent for use with water and water-based materials, which supports finishing operations that rely on waterborne products alongside air-driven spray equipment.
• The hose uses three-piece plated brass reusable connections, which allows the fittings to be reused after disassembly and supports coupling retention at the hose ends under working pressure.

Air Hose Installation And Connection Fit Details

This air hose assembly uses three-piece plated brass reusable connections with a 1/4 inch NPS thread, which ties directly into setups using that thread standard on spray equipment and air lines. The spiral reinforcement is described as high tensile strength, which supports coupling retention at the ends under pressure and helps the hose stay secure at the fittings during use. The reinforcement is also specially designed for maximum flexibility under pressure, so the hose maintains bendability when charged with air, helping routing around equipment and fixtures. The 25 ft length fits many spray finishing layouts where the operator works around booths or benches without excessive slack. The 1/4 inch inside diameter supports air delivery to spray finishing tools that are configured for this hose size.

Using This Air Hose In Finishing Workflows

Where This Binks Air Hose Assembly Performs Best

This Binks air hose assembly is recommended as a premium spray finishing air hose, so it is positioned for use in finishing operations where controlled air delivery to spray equipment is critical. It is also described as designed for all finishing operations and rugged industrial applications, which ties it to environments where spray work and heavier-duty air use can occur in the same facility. Class B oil resistance in the EPDM tube supports use where lubricants are present in the airline supply or where oil and grease are present in the environment, so it fits lines that see oil-misted air or oily shop conditions. The hose is also identified as excellent for use with water and water-based materials, which aligns with finishing workflows that rely on waterborne coatings and cleaning processes. A temperature range from -40 F to +200 F allows the hose to function in cold or hot conditions typically encountered in unconditioned or process-heated spaces.

Design Details That Support Consistent Spray Results

The smooth cover on this red EPDM hose is described as a smooth cover for easy cleaning, which helps operators wipe off overspray or dust and keep the hose from transferring buildup onto finished work. Abrasion resistance in the cover supports hose life when it contacts booth grates, floor surfaces, or equipment edges, helping maintain a consistent air path over time. High tensile strength spiral reinforcement is specially designed for maximum flexibility under pressure and maximum coupling retention, so the hose stays flexible during spraying while still holding fittings securely at the ends. The 1/4 inch inside diameter focuses the air passage for spray finishing air hose duty, which supports stable air delivery to spray guns sized for this hose. The 25 ft length allows routing from air supply points to spray positions without excessive coiling, which helps maintain predictable handling and reduces drag during spray passes.

Common Questions About This Binks Spray Air Hose

Selecting This Air Hose For Your Spray Setup

This Binks 71-1105 air hose assembly combines a 25 ft length, 1/4 inch inside diameter, and 250 psi working pressure to support spray finishing air hose needs in finishing and rugged industrial environments. The EPDM tube with Class B oil resistance and the red EPDM smooth abrasion resistant cover are described for use where lubricants, oil, grease, water, and water-based materials are present. High tensile strength spiral reinforcement, three-piece plated brass reusable connections, and a 1/4 inch NPS thread work together to support coupling retention and flexibility during use, so the hose fits into spray equipment setups built around these specifications.