16" RV767 Heavy-Duty Shelf/Hang Rod Bracket, Satin Zinc Finish

16 Inch Heavy Duty Shelf Bracket For Shelving Loads

16 inch heavy duty shelf bracket describes this Reeve Model 767-16 bracket, which is a tempered steel support designed for shelving and hang rod applications where higher loads are expected. The 16 inch length provides a deeper support surface, so shelving and rods can carry more functional storage space along a wall run. The bracket is made from 1/8 inch thick tempered steel, which gives it the strength and rigidity needed for commercial fixture layouts and heavier closet or perimeter shelving. A satin zinc Brillatone finish on the bracket offers a clean, neutral appearance that coordinates with typical store fixture and closet standards while resisting everyday wear in a retail or storage setting. The bracket weight rating of 675 to 1,325 lb per pair, depending on length, supports layouts that need substantial capacity along standards.

Key Shelf And Hang Rod Bracket Advantages

• The Reeve Model 767 design supports both shelving and hang rod use, so one bracket type can handle flat shelf surfaces and hanging space along the same standard run.
• A weight rating of 675 to 1,325 lb per pair, based on length, allows the system to handle heavier merchandising, storage, or wardrobe loads without changing bracket style.
• The 1/8 inch thick tempered steel material provides a rigid support arm, which helps shelving stay level under load and reduces deflection in everyday use.
• The satin zinc Brillatone finish delivers a neutral metallic look that blends with typical RV704 series standards and other perimeter fixtures in retail or closet layouts.
• Two engagement teeth on the bracket, with a top tooth uphook design, increase bracket hold to the standard so the arm seats securely into the slotted upright.
• Use with concealed, recessed, or T standards on perimeters, loose fixtures, shelving, and hangrod runs allows one bracket style to support a wide variety of store or closet layouts.

Mounting And Standard Fit For This Bracket

This Reeve Model 767-16 bracket is typically used with the RV704 series standard, tying directly into an established standard-and-bracket layout. The bracket is designed for concealed, recessed, or T standards on perimeters, loose fixtures, shelving, and hangrod runs, so installers can carry the same part across different fixture types and wall conditions. Two engagement teeth on the bracket interface with the standard slots, and the top tooth uses an uphook design to increase the hold to the standard, helping the arm stay properly seated when loaded. The 16 inch length works within the overall RV767 line of 12, 14, 16, and 18 inch brackets, so depth can be selected to match shelf projection while maintaining a consistent mounting interface along the standards.

Using The Reeve 767-16 Bracket In Real Projects

Where This 16 Inch RV767 Bracket Performs Best

The Reeve Store Equipment Company Model 767 bracket, in the 16 inch length, is suited to shelving and hang rod runs along perimeter standards where extra depth is needed. Its use with concealed, recessed, or T standards means it can support wall perimeters, loose fixtures, and other uprights that share the same RV704 style interface. The 1/8 inch thick tempered steel arm works well for store fixtures that carry folded merchandise on shelves above hang rods, because the bracket is built for both shelving and hang rod support. The satin zinc Brillatone finish coordinates with typical commercial standards, so the bracket visually matches surrounding uprights in retail or storage applications. The available length range of 12, 14, 16, and 18 inch in the RV767 line lets planners standardize on one bracket family while choosing depth to suit shelving or garment reach.

Details That Help With Load Capacity And Alignment

The weight rating of 675 to 1,325 lb per pair, depending on length, gives a clear performance window, so fixture runs can be designed around known capacity when selecting bracket spacing and shelf length. Using 1/8 inch thick tempered steel provides a strong, stiff support arm, which helps shelving stay aligned along a wall of RV704 series standards even under substantial loads. The bracket features two engagement teeth that sit into the standard slots, and the top tooth has an uphook design that increases the hold to the standard, helping keep the bracket properly locked in position during loading and unloading. Because the 16 inch length is part of the same Model 767 bracket line as the other sizes, replacement or expansion within an existing RV767 and RV704 layout stays consistent in appearance, mounting geometry, and rated performance.

Common Questions About The 16 Inch RV767 Bracket

Choose The 16 Inch RV767 Bracket For Heavy Runs

The Reeve Store Equipment Company 16 inch Model 767-16 bracket from Wurth Baer Supply delivers a heavy duty shelf and hang rod support in 1/8 inch thick tempered steel with a satin zinc Brillatone finish. Its weight rating of 675 to 1,325 lb per pair, depending on length, and typical use with RV704 series standards make it a practical choice for perimeter shelving, loose fixtures, and hangrod runs that need higher capacity. Select this 16 inch RV767 bracket when a deeper, heavy duty support is required across concealed, recessed, or T standard layouts.