10" RV767 Heavy-Duty Shelf/Hang Rod Bracket, Satin Zinc Finish

Heavy Duty Shelf Hang Rod Bracket For High Loads

Heavy duty shelf hang rod bracket describes this 10 inch Reeve Store Equipment Company bracket that is designed to support both shelving and hang rods in closet, perimeter, and fixture layouts. The bracket is part of the Reeve Model 767 line, so it aligns with a proven store-fixture style standard system. Its 1/8 inch thick tempered steel construction carries the structural work, giving the bracket the stiffness needed for heavier shelf spans and garment loads in a retail or storage run. A weight rating of 675 to 1,325 pounds per pair, depending on length, ties that steel section directly to real load-carrying capacity, so pairs can be planned into shelf rows where higher loads are expected. The satin zinc finish gives a bright, Brillatone appearance that fits typical closet and store standards while providing a hard surface that stands up well to day-to-day contact from shelving and hang rods.

Key Shelf Bracket Details That Drive Performance

• The Reeve Model 767 design provides a matched bracket for a recognized standard system, which helps keep shelving and hang rod runs consistent across perimeter walls and loose fixtures in a project.
• The 10 inch length defines the shelf projection this bracket supports, so installers can size shelf depths and hang rod positions in line with the rest of the RV767 family layout.
• The 1/8 inch thick tempered steel material gives the bracket a strong cross-section, which helps it resist bending when loaded with shelving, garments, or other stored items along a fixture run.
• The weight rating of 675 to 1,325 pounds per pair, depending on bracket length, allows installers to select bracket spacing and quantity to handle heavier shelf sections where higher live loads are expected.
• The satin zinc Brillatone finish presents a clean metallic look that coordinates with typical zinc standards, which keeps closet and retail interiors visually consistent while using a durable plated surface.
• The bracket design that supports both shelving and hang rods lets one component carry two functions, which simplifies planning fixture layouts that need a shelf above a clothes rod.

Shelf Bracket Engagement And Mounting Behavior

This heavy duty shelf hang rod bracket is typically used with the RV704 series standard, so its connection points are aligned for that recessed or concealed standard style on perimeter walls and loose fixtures. The bracket is made to work with concealed, recessed, and T standards, which means its hook geometry matches the slots commonly used in those standard profiles. Two engagement teeth on the bracket face handle the actual seating in the standard, with the top tooth using an uphook design that increases the hold to the standard bar once loaded. That uphook engagement helps the bracket stay seated under downward shelf and hang rod loads, which supports more secure vertical alignment along a wall of standards.

Using This Reeve 767 Bracket In Real Projects

Where This Shelf Hang Rod Bracket Fits Best

The Reeve Model 767 shelf and hang rod bracket is typically used with the RV704 series standard, placing it in layouts that use that standard for closet and perimeter shelving. Its ability to work with concealed, recessed, and T standards means it fits into wall standards on perimeter runs as well as loose fixtures that share the same slot profile. The 10 inch length serves applications needing a moderate shelf depth where garments or stored items hang below a shelf, such as closet sections or retail face-outs. Because the bracket is part of a family with 12, 14, 16, and 18 inch options, installers can match this 10 inch version to shorter bays while using longer lengths in adjacent sections, keeping the bracket style consistent across the project. The satin zinc Brillatone finish matches zinc-finished standards commonly used in these environments, so the bracket lines blend into the overall fixture design.

Details That Support Load Capacity And Consistency

The 1/8 inch thick tempered steel body is central to this heavy duty shelf hang rod bracket, giving it the rigidity needed to contribute to a weight rating from 675 to 1,325 pounds per pair, depending on bracket length in the family. On the 10 inch version, that material thickness helps resist deflection when shelves and hang rods are loaded, which supports level lines of shelving across multiple standards. The two engagement teeth, with the top tooth formed as an uphook, create a more positive connection to RV704 and similar standards by seating the bracket against the bar as weight is applied. That engagement style helps keep brackets from walking out of the standard under vertical loads, which supports repeatable vertical alignment along a run of shelves. Using a bracket designed for both shelving and hang rods means the same heavy duty support carries shelf loads and garment loads, which simplifies loading calculations along a standard-equipped wall.

Common Questions About This Heavy Duty Bracket

Choose This Bracket For Heavy Shelf Runs

The 10 inch Reeve Model 767 heavy duty shelf hang rod bracket pairs 1/8 inch thick tempered steel with a weight rating from 675 to 1,325 pounds per pair, depending on length, so it suits demanding shelf and hang rod runs. Its design for use with RV704 series and concealed, recessed, and T standards supports consistent engagement across perimeter walls and loose fixtures. The satin zinc Brillatone finish coordinates with common zinc standards, tying the bracket into typical closet and retail layouts. For projects needing a 10 inch projection in a proven standard system, this heavy duty shelf hang rod bracket offers a practical way to carry both shelving and hang rod loads.