Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Quickscrews #10 x 3-inch Washer Head Installation Screw is a coarse-thread cabinet fastener designed for installations where screws must span thick material, multiple layers, or extended embedment into a wall substrate. The white washer head, combo Phillips/square drive, and double auger point combine to keep installation fast and the finished interior clean.
A 3-inch installation screw is built for situations where shorter fasteners fall short. When cabinets are hung through finished drywall into studs, a 3-inch length delivers enough embedment to anchor securely even after accounting for the combined thickness of the cabinet back panel and the wallboard. The same reach applies when stacking face-frame cabinets against a thick furring strip or when securing a cabinet to blocking that sits slightly proud of the framing. This length is also well suited for fastening cabinets to one another through their side panels when the stiles are wide or the combined clamping distance requires more thread engagement than a shorter screw can provide.
The washer head distributes clamping load over a wide bearing surface, which prevents the head from pulling through or dimpling the cabinet panel face under load. The white head color makes these screws nearly invisible against white melamine interiors, white-painted panels, and light-colored cabinet boxes, so there is no need to touch up or conceal fastener heads on the visible interior. The zinc finish on the shank handles the dry indoor environment of a finished cabinet installation without adding cost from heavier coatings.
Cabinet installers and shop crews hanging full kitchens or bath sets benefit from having a single installation screw that covers both wall-mounting and cabinet-to-cabinet fastening at the longer end of the job. The combo drive recess means a crew member does not stop to swap bits when picking up a screw from the box, and the double auger point starts cleanly in studs and solid wood blocking without walking. At 1,500 screws per box, this pack is sized for full-room installs or a shop that stages hardware before a job rather than running out mid-hang.
A 3-inch screw passes through the cabinet back panel, the drywall, and still delivers solid embedment into the wall stud behind it. Shorter screws may not reach deep enough into the framing to hold upper cabinets reliably under load.
The recess accepts a #2 Phillips bit or a #2 square bit. The square recess is designed to hold the screw on a correctly sized bit for easier one-handed placement during installation.
The white head color is designed to blend into white and light-colored cabinet interiors. It is not invisible, but it is far less noticeable than a silver or zinc-gray head against a white panel.
The double auger point is designed to self-start in wood without a pilot hole. In very dense hardwood framing or when working close to an edge, a pilot hole reduces the risk of splitting.
Yes. The 3-inch length and washer head make it practical for both wall-mounting and cabinet-to-cabinet fastening through side panels where the combined thickness requires a longer screw.
When the job calls for a longer installation screw that anchors deep, blends into a white interior, and works with whatever bit is in the driver, the Quickscrews 8011 in 3-inch length is the screw to have in the box before the first cabinet goes on the wall.
Sold In: 1500 Each
