Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Quickscrews #10 x 3 inch washer head installation screw is built for attaching cabinets, face frames, and casework where the fastener needs to travel through a stile, nailer, or built-up panel before reaching the substrate behind it. The 3 inch length gives you the reach that shorter installation screws simply do not have.
Cabinet installation often involves fastening through material that has stacked up: a face frame stile over a cabinet side, a nailer block behind a wall, or a rail sitting proud of the panel behind it. A 1-5/8 or 2 inch screw runs out of thread before it reaches solid wood in those situations. At 3 inches, this screw passes through the near-side material and still gets meaningful thread engagement in the substrate or wall behind it. That reach is what makes it the right pick for through-stile attachment, cabinet-to-wall fastening behind thicker boxes, and securing adjacent cabinets through doubled-up stiles.
The washer head spreads clamping load across a wider footprint than a pan or flat head, which helps when driving into the face of a cabinet stile or panel where pull-through resistance matters. The white head color is a practical detail for white or light-colored cabinet interiors: the head sits at the surface and disappears rather than standing out as a dark metal spot. The zinc-plated shank handles the corrosion demands of a dry indoor environment. This screw is for interior cabinet installation, not exterior or high-humidity applications.
Cabinet installers working on kitchen and bath jobs find the 3 inch length useful when securing boxes to walls through thicker nailers or when locking adjacent upper cabinets together through wide stiles. Production cabinet shops use it for through-fastening applications where the joint requires more length than a standard installation screw provides. The combination drive means a crew member with either a Phillips or square bit on the gun can keep moving without stopping to swap bits. Packed 500 to the box, the quantity suits a full installation job or a shop's standing stock.
The 3 inch length lets the screw pass through thicker material, like a face frame stile over a cabinet side, and still reach solid wood or framing behind it. A 2 or 2-1/2 inch screw may not reach when material layers stack up.
The double Type 17 auger point has two opposing flutes instead of one. Both flutes clear chips simultaneously, which helps reduce the torque required to drive a long screw through dense or thick material.
Yes. The combination recess accepts a #2 Phillips or a #2 square bit. Both fit the same recess, so you can use whichever bit is on the driver.
No. The zinc finish is rated for dry interior use. For exterior cabinet or trim work, choose a screw with a corrosion-resistant coating rated for outdoor exposure.
The white color is applied to the head only and is a cosmetic feature for blending into white or light cabinet interiors. It does not change the structural performance of the screw.
When the job calls for a fastener that bridges thick material layers and still grips what is behind them, the Quickscrews #10 x 3 inch washer head installation screw gives you the length, the point, and the head profile to get it done cleanly.
Sold In: 500 Each
