Knape and Vogt PSF Series White 11"L x 1-5/8"D x 3"H x Sink Tip Out Tray, No Tab Stop - PSF11-PF-SH-2-W
Description
Knape And Vogt PSF Sink Tip-Out Tray Use
Knape and Vogt PSF series sink tip-out tray turns an 11 inch sink false front into shallow storage, so small items sit in front reach instead of loose in the cabinet. The PSF11-PF-SH-2-W model is an 11 inch long plastic tray, so it fits typical single false front sections in many sink base layouts where that width is specified. The tray depth is slim at 1-5/8 inches, so it uses space in front of the sink without projecting far into the cabinet interior. The tray height is 3 inches, so it creates a small pocket that holds items while still working with most standard sink false front rails that match that opening. This unit is part of KV's line plastic sink tip-out tray kits, so it aligns with their other PSF series offerings for consistent layout on multi-front installations.
Key PSF11-PF-SH-2-W Details For Cabinet Work
- This PSF series unit is a plastic sink tip-out tray, so it resists typical kitchen moisture in the area in front of the sink where splashes and drips are common.
- The tray is 11 inches long, so it suits false fronts designed around that width and lets installers match the hardware width to the cabinet opening.
- The 1-5/8 inch slim tray depth keeps storage shallow, so it leaves more room behind for sink bowls or plumbing that often sit close to the front rail.
- The 3 inch height creates a usable pocket, so items stay contained when the tray is tipped without needing deep clearance behind the false front.
- This kit is available only in white, so it visually matches light interiors and gives a neutral finish inside the sink base area.
- The PSF11-PF-SH-2-W tray is specified without tab stops, so the hinge motion is not governed by molded stop tabs and can match the paired 40 degree hinge function.
Installation Fit For Slim Sink False Fronts
The PSF11-PF-SH-2-W false front kit is built around a slim 1-5/8 inch depth, so installers can mount it behind narrow sink rails where bowl clearance is tight. The 11 inch length lets it span a typical single false front section, so layout follows the cabinet design instead of forcing unusual cuts. A 3 inch height works within many standard false front openings, so the front can tilt open while maintaining an internal pocket for small items. The tray is part of a kit that uses 40 degree hinges, so the opening angle is set for shallow tip-out action that exposes the tray while keeping it close to the cabinet face.
Using This KV Sink Front Kit In Practice
Where The PSF Series Tray Fits Best
This Knape and Vogt PSF series white plastic sink tip-out tray is specified for kitchen and bath cabinet use, so it targets the false front space in sink bases within that cabinetry group. The 11 inch length is suited to cabinet false fronts framed around that size, so it drops into layouts where the rail and stile dimensions match that width. Being in the Sink Tip Out Trays and Accessories product class, it is intended for the hinged false front zone directly in front of the sink bowl, so it adds function to space that would otherwise stay fixed. The slim 1-5/8 inch depth is designed for tighter sink and plumbing clearances, so it works well in installations where standard 2 inch trays might interfere with bowls or drain lines.
Details That Support Consistent Results
The PSF11-PF-SH-2-W model belongs to KV's line plastic sink tip-out tray kits, so its geometry and performance align with other sizes in the same PSF series for multi-cabinet projects. Tray kits are available in Slim 1-5/8 inch and Standard 2 inch depths, so installers can stay within one system while selecting depth based on each sink configuration. Sizes in the series range from 8-5/8 inches to 14 inches wide, so the 11 inch option slots into that range when a mid-size opening is framed. The kit uses 40 degree hinges, so the tip-out angle exposes contents without swinging excessively into the work area, which helps keep motion predictable across multiple false fronts using the same hinge design.
Common Questions About The PSF11-PF-SH-2-W Kit
What type of product is the PSF11-PF-SH-2-W?
The PSF11-PF-SH-2-W is a Knape and Vogt PSF series plastic sink tip-out tray kit, so it converts a fixed sink false front into a shallow, tilting storage space.
How wide and deep is this sink tip-out tray?
The tray is 11 inches long and 1-5/8 inches deep, so it fits mid-size false fronts while staying shallow enough to respect sink bowl and plumbing clearances.
What is the height of the PSF series tray?
The PSF11-PF-SH-2-W tray height is 3 inches, so it forms a modest pocket that holds smaller items without demanding tall openings behind the false front.
What color and material does this KV tray use?
This unit is a white plastic sink tip-out tray, so it offers a neutral interior look and handles typical moisture in front of kitchen and bath sinks.
What opening angle do the hinges provide?
The tray kit pairs with 40 degree hinges, so the false front tips out to a controlled angle that exposes tray contents without swinging far into the room.
How does the slim tray compare to the standard depth?
Tray kits are available in Slim 1-5/8 inch and Standard 2 inch depths, so the slim PSF11-PF-SH-2-W version favors tighter sink and plumbing clearances.
Selecting This Slim 11 Inch Sink Front Kit
The Knape and Vogt PSF11-PF-SH-2-W suits projects calling for an 11 inch long, slim 1-5/8 inch deep white plastic sink tip-out tray, so it aligns well with narrow-clearance sink bases. When the cabinet opening, depth, and desired 40 degree tip-out match these PSF series details, this kit offers a straightforward way to turn a fixed false front into useful storage.
