Wood Technology Free Swinging Inset Glass Door Hinge, 170° Screw-On Brass - 2250.001.028

Inset Glass Door Hinge For Brass Cabinet Projects

Inset glass door hinge from Wood Technology is a brass glass door hinge designed for inset glass cabinet doors where a clean, minimal look is important. The hinge supports glass thickness from 3/16 inch to 1/4 inch, so installers can pair it with common cabinet glass without changing stock materials. A 170 degree angle of opening lets the glass door swing wide, which helps with full access to cabinet interiors during daily use or service work. The hinge works with glass doors up to 22 pounds, giving a clear load guideline when planning door size and glass selection. Maximum recommended glass door size is 39-3/8 inches by 23-5/8 inches, which helps layout wider or taller doors while staying within the hinge design range. The finish is brass, which coordinates with brass-focused hardware layouts and visible cabinet details.

Key Hinge Details That Support Daily Use

• The hinge is described as self-locking with a removable catch that converts to free-swinging, so the same hinge can be used either to hold the door via the catch or to let it move freely depending on project needs.
• Fully adjustable mounting through elongated screw holes lets the installer fine tune hinge position after initial mounting, which helps align glass doors to adjacent fronts and maintain even reveals.
• The hinge is fixed to the glass door with a rubber backed metal clamp screw, so the clamp design grips the glass while the rubber backing resists slip and helps protect the glass contact surface.
• Mounting is specified for side wall, top, and bottom, which gives flexibility to place the hinge along cabinet sides or at horizontal members to support different frameless or framed cabinet layouts.
• A minimum reveal of 3/32 inch at the top and bottom of the glass door is specified, which provides a reference when setting door gaps to avoid binding and to keep movement consistent.

Hinge Mounting, Door Gaps, And Adjustment

This Wood Technology glass door hinge uses a screw-on design at the mounting side, and the description calls out elongated screw holes for adjustment, so the installer can shift the hinge slightly during final alignment without changing drilling locations. Mounting locations are specified as side wall, top, and bottom, which means the hinge can be secured into cabinet structure at these points while the glass sits in the clamping section. The minimum top and bottom reveal requirement of 3/32 inch gives a gap guideline that supports smooth swinging through the 170 degree opening arc. The hinge clamps to glass between 3/16 inch and 1/4 inch thick, so the door edge fits within the clamp range while the rubber backed metal clamp screw works to hold the pane.

Using This Brass Inset Glass Door Hinge In Projects

Where This Inset Glass Door Hinge Fits Best

This Wood Technology free swinging inset glass door hinge is part of the glass door hinges category, so it is oriented toward cabinetry or enclosures where the door panel is glass rather than wood. The hinge is rated for a glass door weight up to 22 pounds, which supports light to moderate cabinet doors often found in residential or light commercial installations. With a maximum recommended glass door size of 39-3/8 inches by 23-5/8 inches, the hinge suits medium-size doors without exceeding the stated design envelope. The glass thickness range of 3/16 inch to 1/4 inch aligns with many standard cabinet glass options, so glass suppliers and shops can use typical stock sizes. Brass finish on the hinge allows it to coordinate with brass-toned pulls and other visible brass components in a cabinet project. The self-locking catch that can convert to free-swinging lets the hinge work in applications where a hold feature is useful or where a fully free door motion is preferred.

Why These Hinge Details Support Clean Results

Elongated screw holes on the mounting side provide adjustability after the hinge is attached, which lets installers fine tune overlay and reveal without re-drilling, improving speed on multi-door runs. The rubber backed metal clamp screw at the glass interface grips the glass door while the rubber backing cushions contact, which supports stable positioning while the door is moved through its 170 degree opening range. The specified 3/32 inch minimum reveal at the top and bottom gives a numeric target for setting gaps, helping multiple doors line up visually across a run of cabinets. Limiting door weight to 22 pounds and door size to 39-3/8 inches by 23-5/8 inches helps keep the hinge operating within its intended load range during repeated opening and closing. Because the hinge is described as self-locking with a removable catch that converts to free-swinging, the same hardware can serve projects that call for a catch function or projects that favor a free-swing door motion without separate hinge types.

Common Questions About This Glass Door Hinge

Choose This Hinge For Brass Inset Glass Doors

The Wood Technology inset glass door hinge in brass provides a 170 degree opening angle, adjustable screw-on mounting, and a rubber backed metal clamp screw for glass thickness from 3/16 inch to 1/4 inch. With a door capacity of 22 pounds and maximum door size of 39-3/8 inches by 23-5/8 inches, it suits many medium-size glass cabinet doors. The self-locking removable catch offers either catch or free-swinging operation, so a single hinge type can support different motion preferences across a project.