Hickory Hardware Self-Close 3/8 Inset Hinge Use

Hickory Hardware self-close 3/8 inset hinge is a semi-concealed, face mount hinge that controls how a 3/8 inch offset cabinet door swings and closes, which supports consistent alignment on face frame cabinets using a familiar traditional layout. The semi-concealed design leaves part of the hinge visible while the working parts sit near the frame, which keeps the hardware accessible during layout while still presenting a clean front when the door is installed. Its face mount style fastens directly to the face frame, which simplifies positioning on standard cabinet construction that already depends on a solid front frame. The 3/8 inch offset configuration sets the door partially over the frame, which matches existing 3/8 inch inset installations in many older and new cabinet runs.

Key Working Details For Cabinet Hinge Jobs

• The self-close function is part of the hinge action, which pulls the door shut at the end of travel so doors settle against the frame without separate catches or latches during everyday use.
• Plated pins drive the hinge movement, which create a smooth, quiet action so doors move predictably and do not chatter when opened or closed during frequent operation.
• This hinge is part of a semi-concealed hinge class, which places the pivot where it is protected from casual contact, helping maintain the swing action over repeated openings.
• The hinge is designed as a face mount hinge, which means it attaches to the front face frame and supports straightforward layout using standard measuring and drilling methods.
• The satin nickel description identifies the hinge finish, which coordinates visually with satin nickel cabinet pulls and knobs for a consistent hardware appearance across the project.

Face Mount 3/8 Inset Hinge Installation Use

This self-close 3/8 inch inset face mount hinge is configured for screw-on installation, which lets the installer position the leaves on the face frame and door and then fasten them directly in place. Its face mount design aligns to the flat front of the cabinet frame, which allows the door edge to be set with a predictable reveal relative to the frame during hinge layout. The 3/8 inch offset detail defines how far the door overlays while still sitting partly within the frame opening, which keeps the geometry consistent with other 3/8 inch inset hinges in the same run. As a semi-concealed hinge, it leaves enough hardware exposed to reference during layout, which supports repeatable placement from door to door.

Why This Self-Close Hinge Fits Cabinet Work

Where This Semi-Concealed 3/8 Inset Hinge Works

This semi-concealed hinge is suited to cabinet projects built around a 3/8 inch offset door design, because the hinge geometry matches that offset and keeps the door position consistent with the surrounding frame. Its role as a face mount hinge fits cabinets that rely on a structural face frame, since the hinge leaf attaches to that frame and uses it as the support surface. The satin nickel description means it visually matches satin nickel pulls and knobs, which helps when hardware appearance needs to stay consistent across all doors. Because the hinge sits in the semi-concealed class, it works where part of the hardware can remain visible without distracting from the cabinet front.

Details That Support Smooth, Repeatable Door Action

The plated pins in this hinge manage the pivoting motion, which helps the door swing smoothly and quietly during repeated opening cycles. That plated construction reduces friction at the joint, which supports consistent closing feel across every door fitted with the same hinge model. The self-close function is built into the hinge, so the mechanism brings the door shut once it reaches the closing zone, reducing the chance of doors resting slightly open along a run of cabinets. As a screw-on hinge, it fastens directly with #6 x 1/2 inch and #6 x 5/8 inch screws, which gives each mounting point a defined bite into the frame and door. For larger jobs, full box quantities of 25 pairs are available, and that pairing format keeps left and right hinge positions balanced during installation while supporting discount pricing on full box orders.

Common Questions About The P243-SN Cabinet Hinge

Selecting This Satin Nickel Self-Close Hinge

This Hickory Hardware self-close 3/8 inset hinge in satin nickel ties hinge geometry, face mount construction, and finish into one part, which helps align visual style and door movement on face frame cabinets. Plated pins and the built-in self-close action manage the swing and closing feel, so multiple doors behave consistently along a run. With options for both broken and full box quantities of 25 pairs, this P243-SN hinge can be ordered to match single-door work or larger cabinet projects where uniform hardware is required.