Doellken PVC Edgebanding 15/16" x 3 mm, 2477 Northsea, 328', 2477 1503 1

PVC Edgebanding For Finished Panel Edges

PVC edgebanding in Color 2477 NorthSea, 3mm Thick 15/16 inch x 328 foot Roll gives fabricators a defined way to finish exposed panel edges with a consistent color match to a NorthSea tone. The 3mm thick edge banding builds a substantial edge on casework or furniture components, which helps create a solid-looking perimeter on melamine or laminate panels. The 15/16 inch width covers common panel thicknesses while giving a little working margin for trimming flush, which supports clean visual lines on doors and cabinet parts. The 328 foot roll format supports longer runs or multiple cabinets from a single roll, helping keep edge material consistent across a project. As a PVC product in the Edgebanding, PVC class, this edge banding fits right into standard shop workflows that already use PVC banding on commercial or residential casework.

Key PVC Edgebanding Details For Shop Use

• The 3mm thick PVC edge banding builds a robust edge profile on panels, which helps match modern cabinet styling and gives trimmed edges a more substantial appearance in finished installations.
• The 15/16 inch width on this edge banding provides coverage over standard panel thicknesses, which allows trimming equipment to flush the band to the surface while still hiding the core material along the edge.
• The 328 foot roll length allows longer production runs of panels before changing rolls, which supports efficient throughput when banding multiple doors, drawer fronts, or cabinet components in the same color.
• Color 2477 NorthSea defines the visual tone of the edge banding, which supports designers and builders who are matching NorthSea-colored surfaces across casework and furniture projects.
• The Doellken Woodtape brand and Edge Banding product class place this PVC edgebanding within a familiar category for shops already set up for PVC banding work.

Edgebanding Size And Fit For Panel Edges

This PVC edgebanding, Color 2477 NorthSea, 3mm Thick 15/16 inch x 328 foot Roll is dimensioned for covering panel edges in cabinet and furniture construction. The 3mm thickness provides a pronounced edge that aligns well with solid-looking fronts on cases and doors. The 15/16 inch width gives fabricators material to trim back to the face on standard panel thicknesses, which supports tight, flush edges along vertical and horizontal components. In roll form at 328 feet, the product supplies enough length for repetitive runs on edgebanders without frequent changeover, which helps shops keep banding appearance uniform from part to part.

Using NorthSea PVC Edgebanding In Projects

Where This 3mm Edge Banding Is Applied

The PVC edgebanding, Color 2477 NorthSea, 3mm Thick 15/16 inch x 328 foot Roll is suited to edging panel-based components in cabinetry and case goods where a NorthSea color edge is required. As an Edge Banding product in the Edgebanding & Surfacing category, it works as the finishing layer on exposed panel edges so the core of the substrate is concealed. The 15/16 inch width lets installers run this banding along vertical cabinet sides, shelves, doors, or partitions that match a NorthSea surface, maintaining a continuous color band around the piece. The 3mm thickness helps create a visible, defined edge that pairs well with contemporary panel designs that favor thicker edge reveals. In production, the 328 foot roll length supports repeated banding cycles on multiple units, keeping the same color number 2477 across all edges.

Why Thickness, Width, And Roll Length Matter

The 3mm thick PVC edgebanding builds a stronger visual edge than thinner bandings, which helps panels read more like solid elements when viewed from the front. That thickness also supports machining and trimming operations that need a bit of material to work with at the edge. The 15/16 inch width provides enough coverage over the panel edge and a slight overhang, so edge-banding equipment can trim back to the panel faces and leave a smooth transition without exposing the core. The defined Color 2477 NorthSea allows designers and builders to tie edge appearance to surfaces planned in the same color family. With 328 feet per roll, shops can set up an edgebanding run for multiple cabinets or a full room of casework and keep the edge color and material properties consistent from the first part to the last.

Common Questions About This PVC Edgebanding

Select NorthSea PVC Edgebanding For Panel Work

PVC edgebanding, Color 2477 NorthSea, 3mm Thick 15/16 inch x 328 foot Roll from Doellken Woodtape gives shops a defined edge solution for panels built around a NorthSea color scheme. The 3mm thickness, 15/16 inch width, and 328 foot roll length combine to support consistent, repeatable edging on cabinets, furniture components, and other panel-based builds. For projects routed through Wurth Baer Supply, this Edge Banding item slots directly into workflows built around PVC edgebanding and NorthSea-colored surfaces.