Doellken PVC Edgebanding 15/16" x 1 mm, 2477 Northsea, 300', 2477 1540 1

PVC Edgebanding 1mm 15/16 x 300 For Panels

PVC edgebanding 1mm 15/16 x 300 describes a Doellken Woodtape edge banding roll designed to cover and finish exposed panel edges. The 1mm thick PVC construction creates a defined, uniform edge that supports consistent machining and trimming on cabinetry or furniture parts. The 15/16 inch width works with panel layouts that need coverage across standard edge depths while still leaving room for precise flush trimming. The 300 foot roll format lets shops run multiple parts or jobs from a single coil, helping maintain color and thickness consistency across a project. The Color 2477 NorthSea finish identifies a specific color tone in the Doellken Woodtape system, allowing fabricators to align edge appearance with matching surfaces. The Doellken Woodtape brand signals a PVC edgebanding line built for woodworking applications that rely on repeatable sizing and color coding.

Key PVC Edgebanding Details For Daily Work

• The 1mm thick PVC construction provides a solid edge profile that supports standard edge banding trimming passes, helping produce a clean transition from face to edge on panel components.
• The 15/16 inch width covers typical panel edge depths used in many cabinet and casework layouts, allowing installers to apply and trim without excess waste along the edge.
• The 300 foot roll length supports batch runs of cabinet parts or shelves from the same coil, keeping color 2477 NorthSea consistent from piece to piece during production.
• The Color 2477 NorthSea designation ties this roll to a specific color reference, helping shops coordinate edge appearance with matching decorative surfaces from the same color family.
• The Doellken Woodtape branding identifies this product within a recognized PVC edgebanding line, which supports repeat ordering by manufacturer part number 2477-1540-1 when a color and size match is required.

Edgebanding Size And Format For Clean Application

The 1mm thickness on this PVC edgebanding creates enough material for standard edgebanding cutters to trim flush without breaking through the edge, which supports a smooth finished profile on cabinet and furniture parts. The 15/16 inch width gives coverage across common panel thicknesses while leaving a small overhang to be trimmed, so installers can work to a tight reveal. The 300 foot roll configuration allows continuous feeding through edgebanding equipment, which helps reduce coil changes during runs that share the same color 2477 NorthSea. Together, these dimensions and the roll format are set up to support straightforward edge banding workflows in woodworking shops using PVC material.

Using NorthSea PVC Edgebanding In Shop Production

Where Color 2477 NorthSea Edgebanding Fits

This PVC edgebanding in Color 2477 NorthSea is positioned for woodworking applications that call for a specific color reference on exposed panel edges. The defined Color 2477 NorthSea label lets shops organize projects around a known edge tone, so cabinet cases, shelves, or furniture components can share one consistent edge color. When panels or laminated surfaces are specified around the NorthSea color family, this Doellken Woodtape edge banding gives fabricators a matching edge material in a 1mm thickness. The 15/16 inch width supports use on panel edges where a near-full coverage width is required, such as cabinet sides or tops, without needing a wider, more wasteful strip.

Why These Edgebanding Details Support Repeatable Results

The 1mm thick PVC design on this Doellken Woodtape roll supports repeatable trimming, because the consistent thickness allows edgebanders and handheld trimmers to work with predictable cutting depth across multiple parts. The 15/16 inch width is sized to give a manageable overhang that can be trimmed back to the panel face, reducing the likelihood of cutting into the surface while finishing edges. With 300 feet per roll, a shop can process many components for a run using the same coil of color 2477 NorthSea, which maintains project uniformity and reduces variation between batches. The manufacturer part number 2477-1540-1 ties all of these details together into a precise reference, helping buyers repeatedly source the identical color, width, thickness, and roll length whenever that same edge profile is required on future jobs.

Common Questions About NorthSea PVC Edgebanding

Selecting This NorthSea Edgebanding For Your Project

This Doellken Woodtape PVC edgebanding in Color 2477 NorthSea, at 1mm thick and 15/16 inch wide on a 300 foot roll, provides a defined set of dimensions and color for panel edge finishing. When a job calls for a NorthSea-toned edge on cabinetry or furniture components, these verified details give a clear match point. Ordering by the manufacturer part number 2477-1540-1 through Wurth Baer Supply connects your project directly to this specific color, thickness, width, and roll length so edge profiles and appearance align with your planned panel work.