Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
sink tip out tray gives you a simple way to use the false front area at a sink for small-item storage. The Rev-A-Shelf sink tip out tray in this set is a white plastic sink tip out tray from the 6551 Series, sized at 36 inches long, 2-7/16 inches deep, and 3-15/16 inches high. This sink tip out tray set is designed for sink front use and includes one tray, two hinges, and two end caps. Buyers looking for a deep sink tip out tray or a custom length sink tip out tray should note that the 6551 and 6571 Series are described as deep-depth trays and are intended for custom length applications where noted. This tray has no tab stops.
Key specs to confirm: This Rev-A-Shelf sink tip out tray is listed at 36 inches long, 2-7/16 inches deep, and 3-15/16 inches high. It is a white plastic tray in the 6551 Series and is described as a deep-depth tray. Before purchase, confirm the sink front false panel width, the interior clearance behind the panel, and whether your application calls for a tray with no tab stops. If you are trimming for a custom length application, confirm the cut requirements and fit with the included end caps. Safety, load, compliance, and any installation tolerances are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: One sink tip out tray, two hinges, and two end caps are verified as included for this set.
What to verify before ordering: Check your sink front opening size, cabinet construction, hinge mounting position, required tray depth, and whether a no-tab-stop tray matches your existing setup or intended installation. Confirm that the included hardware suits your panel and cabinet design.
A sink front area often becomes wasted space because the false drawer front is not used for storage. A sink tip out tray addresses that by turning the panel into a shallow access point for small items near the sink. For installers, remodelers, and serious DIY buyers, this matters most in kitchens and baths where every inch of cabinet space counts.
This Rev-A-Shelf sink tip out tray set is built around a 36 inch white tray with a deep 2-7/16 inch profile and a 3-15/16 inch height. Those verified dimensions help when you are planning around sink bowls, plumbing, and the back side of the false front. Buyers searching for a sink tip out tray replacement often need to match both the tray size and the stop style. In this case, the product data states that the tray has no tab stops, so that detail should be checked carefully against the tray being replaced.
The included sink tip out tray hinges and sink tip out tray end caps make this set useful when you want a packaged tray and hardware group instead of ordering separate pieces. The product data also states that the 6551 and 6571 Series trays are intended for custom length applications where noted. That is useful for shops or installers who may need to adapt a tray to a specific sink base layout. If you plan to trim for a custom length sink tip out tray installation, verify the exact cut plan and how the end caps will finish the tray after sizing.
This product can also fit buyers looking for a deep sink tip out tray for holding scrubbers, sponges, or other small sink-side items. Exact storage capacity is not provided, so buyers should confirm interior clearance and practical fit based on the items they intend to store. Follow manufacturer installation guidance and local building requirements where applicable.
When comparing sink tip out tray options, buyers usually focus on tray material, stop style, depth, included hardware, and whether the tray is meant for standard or custom length work. This Rev-A-Shelf sink tip out tray gives a clear set of verified facts that can simplify that comparison. It is a plastic sink tip out tray, it is white, it is part of the 6551 Series value line, and it includes one tray with two hinges and two end caps.
Another practical comparison point is depth. Product data identifies this series as deep depth and gives the exact tray depth as 2-7/16 inches. That can matter if you need more room than a shallower sink front tray provides, but you still need to fit around the sink and cabinet structure. The listed 36 inch length also makes it easier to compare against your sink base width and the false front panel size.
For replacement work, consistency matters. A buyer replacing an older tray should compare dimensions, tray style, and no-tab-stop design before ordering. For new work, a buyer should compare the included parts and confirm whether the supplied hinges and end caps fit the cabinet plan. Because this is a sink tip out tray set rather than a tray-only listing, it can reduce sourcing steps for the installer. If any mounting details, weight limits, or technical tolerances are critical to your job, confirm them with the manufacturer before installation.
Rev-A-Shelf sink tip out tray set includes one tray, two hinges, and two end caps.
This sink tip out tray is 36 inches long, 2-7/16 inches deep, and 3-15/16 inches high.
This sink tip out tray can work as a replacement if your existing tray size, no-tab-stop style, and hardware layout match.
This Rev-A-Shelf sink tip out tray has no tab stops.
This sink tip out tray is typically installed behind a sink front false panel in kitchen or bath cabinetry.
This 6551 Series sink tip out tray is described for custom length applications where noted, so confirm your trim plan before ordering.
This sink tip out tray set includes two hinges as verified in the product data.
This sink tip out tray fit should be checked against false front width, interior clearance, sink position, and hinge mounting space.
This Rev-A-Shelf sink tip out tray is made of plastic and comes in white.
Follow manufacturer installation guidance and local building requirements where applicable.
Rev-A-Shelf sink tip out tray is a practical choice when you need a 36 inch white plastic tray set with two hinges and two end caps. Before purchase, confirm the false front size, the 2-7/16 inch depth, the 3-15/16 inch height, and the no-tab-stop design against your cabinet layout. If you are planning a sink tip out tray replacement or custom length installation, verify trim needs, hinge fit, and available interior clearance so the set matches your project the first time.
Sold In: 1 Package
