Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
sink tip out tray gives you a practical way to use the false front area at a sink cabinet for small-item storage. This Rev-A-Shelf sink tip out tray is a white plastic sink tip out tray from the 6551 Series, built as a soft-close sink tip out tray with a 36 inch length, 2-7/16 inch depth, and 3-15/16 inch height. The set is designed for sink front access where a deep sink tip out tray can help keep sponges, scrubbers, or other sink-area items off the cabinet floor. Rev-A-Shelf lists this tray as part of its value line of plastic sink tip-out trays. The product data also states that this tray has no tab stops and is intended for custom length sink tip out tray applications, with end caps included where noted.
Key specs to confirm: This Rev-A-Shelf sink tip out tray is listed at 36 inches long, 2-7/16 inches deep, and 3-15/16 inches high. Buyers should confirm the usable width behind the sink front, the available interior depth, and the clearance around plumbing or sink mounting hardware before purchase. Because this is a soft-close sink tip out tray set and the tray has no tab stops, the installer should also confirm the hinge and front-panel setup needed for the intended cabinet. If any safety, load, compliance, or installation performance details are required for your project, those details should be confirmed with the manufacturer or technical documentation.
What's included: Verified product data supports one tray in white, soft-close hardware references in the product description, and end caps where noted. Included items should be confirmed against the exact package listing before ordering.
What to verify before ordering: Confirm your sink front opening width, the cabinet's inside depth, tray height clearance, sink and plumbing interference, whether your application needs end caps, and whether a no-tab-stop tray matches your preferred sink tip out tray replacement or installation method.
A soft-close sink tip out tray is typically chosen by buyers who want to turn unused sink front space into organized storage. In a kitchen or bath cabinet, that space often collects nothing but dust because the false drawer front is not set up to open. A Rev-A-Shelf sink tip out tray gives that area a defined storage pocket for small cleaning items that are easier to reach near the sink than in a full base cabinet below.
This specific white sink tip out tray is part of the Rev-A-Shelf 6551 Series value line of plastic sink tip-out trays. The verified dimensions matter because sink cabinets can vary a lot once the sink bowl, clips, plumbing, and rails are in place. The 2-7/16 inch depth identifies this as a deep sink tip out tray, which can be useful when a buyer wants more usable tray space in a narrow access area. The 36 inch length also points to projects where a custom length sink tip out tray format is being considered rather than a one-size layout.
For a sink tip out tray replacement, the practical concern is usually fit. A buyer may already have hinges or a front panel in place and needs to confirm whether a no-tab-stop tray will match the opening and motion they want. For first-time sink tip out tray installation, the main issue is often clearance. Even if the front width looks right, the tray height and depth still need to clear the sink and any hardware behind the panel. Because this product is described as designed for custom length applications, installers should review whether trimming, finishing, or end-cap use applies to the exact job.
Another common use case is standardizing storage across several cabinets in a shop or multi-room project. In that case, a plastic sink tip out tray can be appealing because the product identity, dimensions, and color are clearly stated. Buyers should still confirm the exact hinge, end-cap, and closing setup for each cabinet before ordering.
When buyers compare sink tip out trays, the meaningful differences usually come down to material, dimensions, tray style, and whether the package supports the intended opening method. This Rev-A-Shelf sink tip out tray stands out in verified terms because it is clearly identified as a white plastic tray in the 6551 Series with a 36 inch length, 2-7/16 inch depth, 3-15/16 inch height, and no tab stops.
Those details help a buyer make a cleaner comparison against other generic tray formats without relying on assumptions. A shallow tray may fit more easily around sink hardware, while a deep sink tip out tray may offer more usable storage if the cabinet allows it. A tray with tab stops may suit one install style, while this no-tab-stop version may be preferred in another. For that reason, this product is best evaluated by matching the verified dimensions and tray configuration to the cabinet front and hinge plan already in use.
Brand clarity also matters in replacement work. Rev-A-Shelf is the verified brand, and the product is specifically categorized as a sink tip out tray accessory item for kitchen and bath cabinet use. That makes it easier for purchasing teams, installers, and serious DIY buyers to document what they are ordering. The product data also notes custom length applications and end caps where noted, which are useful checkpoints when consistency across multiple cabinets matters. Rather than choosing by appearance alone, buyers should compare the tray's length, depth, height, no-tab-stop design, and included components against the project requirements.
This sink tip out tray fits only where the cabinet front opening and interior clearance support its 36 inch length, 2-7/16 inch depth, and 3-15/16 inch height.
This Rev-A-Shelf tray is identified in the product name as a soft-close sink tip out tray.
This Rev-A-Shelf sink tip out tray is listed as a plastic tray in white.
This sink tip out tray has no tab stops according to the verified product data.
This Rev-A-Shelf tray is described as designed for custom length applications.
End caps are included where noted, so the exact package contents should be confirmed before ordering.
Sink tip out tray installation should start with checking front opening width, inside depth, tray height clearance, and interference from sink bowls or plumbing.
This sink tip out tray can work as a replacement if the existing cabinet front, hinge setup, and interior dimensions match the listed tray size and no-tab-stop design.
Included components should be confirmed from the exact package listing. Follow manufacturer installation guidance and local building requirements where applicable.
sink tip out tray selection is easier when you match the verified dimensions and tray style to the actual cabinet opening. This Rev-A-Shelf sink tip out tray set gives you a white plastic tray in a 36 inch length with a deep 2-7/16 inch profile, 3-15/16 inch height, and no tab stops. Before purchase, confirm interior clearance, sink and plumbing interference, whether end caps are included for your package, and whether the soft-close setup matches your intended installation.
Sold In: 1 Each
