Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Rev-A-Shelf 6551 Series tip-out tray set converts the false drawer front below a kitchen or bath sink into a shallow storage compartment, putting a frequently dead cabinet zone to work for sponges, scrubbers, and small sink-side essentials.
The strip of cabinetry directly in front of a kitchen sink is almost always a false front: it looks like a drawer but opens onto nothing. This tray set reclaims that space. The tray tips forward on its hinges when pulled, giving access to a 2-7/16-inch-deep compartment that runs the full 36 inches of the opening. It is sized for the small items that otherwise crowd the countertop or disappear under the sink: sponges, dish brushes, drain stoppers, and rubber gloves. When the front is pushed closed, the tray disappears behind the cabinet face and the kitchen reads clean.
The tray is white plastic, a practical choice for a location that sees daily moisture, soap residue, and the occasional splash. Plastic does not rust, warp, or stain the way a bare metal or unfinished wood tray would in this environment, and it wipes down quickly. The motion comes from four soft-close hinges, which ease the tray in on the return stroke so it does not bang shut. Four European clips attach the hinges to the false front, so the mounting hardware is part of the kit. The no-tab-stop configuration means the tray swings to a fully open position without catching, which matters on a 36-inch unit where rear-corner access would otherwise require a reach-around.
This is the right tray for a wide sink cabinet where a full-width false front is already in place and the homeowner or installer wants to activate that space without modifying the cabinet box. Cabinet shops building or refitting kitchens can install the set during rough-in so the storage is built in from day one. Designers specifying sink-area storage can count on the soft-close hardware to match the damped motion feel of the rest of the drawer and door hardware in the run. For narrower false fronts or configurations that call for a tab stop, other sizes and configurations in the 6551 Series are the starting point.
The set includes one 36-inch white tray, four soft-close hinges, and four European clips. No additional hinge hardware is needed to complete the installation.
A tab stop limits how far the tray tips open. Without one, the tray swings to a fully open position, which makes it easier to load and unload the full length of a wide tray.
The tray is designed to mount behind a standard false drawer front below a sink. The 36-inch length suits a wide single sink cabinet. Measure your false front opening before ordering to confirm the fit.
The soft-close hinges dampen the closing stroke, bringing the tray in quietly. They do not provide assisted or damped opening.
This tray set adds a practical storage compartment to a cabinet location that most kitchens leave empty, using hardware that is already part of the false front rather than cutting into the cabinet box.
Sold In: 1 Each
