Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Manchester knob is a zinc die cast cabinet knob in the Manchester collection that provides a consistent look across doors and drawers, which helps keep a project visually tied together from one opening to the next. The Rustic Iron finish on this knob sets a darker, textured tone on the face, which suits projects calling for a traditional or aged metal appearance on cabinet fronts. The 1-3/8 inch (35 mm) diameter face gives enough finger contact area to pull doors and drawers without crowding smaller fronts. The 1 inch projection carries the knob away from the surface, providing finger clearance between the hand and the door or drawer face during use. The 3/4 inch base diameter steps the knob down neatly to the mounting point, which keeps the transition to the cabinet surface looking proportional on typical face frames and panel fronts.
The 1-3/8 inch diameter knob face sets the outer footprint on the cabinet, which determines how much of the door or drawer front the knob visually occupies once installed. The 1 inch projection from the mounting surface controls how far the gripping point stands off, which influences how easily fingers can hook behind or around the knob during everyday use. The 3/4 inch base diameter concentrates the load at the mounting area, which helps distribute pull forces into the cabinet front while still keeping the mounting zone compact. The 8-32 screw size interface establishes a standard machine-screw connection, which works with common cabinet drilling patterns that rely on this thread for single-hole knob mounting.
The Manchester series identity ties this knob to the broader Manchester collection, which benefits jobs where doors and drawers share a common hardware style across a room or bank of cabinets. The Rustic Iron finish gives the knob a dark, traditional metal look, which aligns with casework that uses woods, laminates, or finishes calling for an iron-style accent on face frames and doors. The 1-3/8 inch diameter and 1 inch projection combination positions the gripping surface at a practical size and reach, which works well on both cabinet doors and medium-width drawer fronts throughout a kitchen, bath, or work area. The zinc die cast construction provides a metal body for the knob, which suits installations where hardware is handled frequently and must maintain its form under repeated pulling motion.
The 1-3/8 inch diameter face dimension gives installers a repeatable reference when laying out knob locations, which simplifies spacing from door and drawer edges across multiple fronts on a run of cabinets. The 1 inch projection figure can be used when planning door swing clearances, which helps keep knobs from contacting adjacent surfaces by knowing how far the hardware stands off the face. The 3/4 inch base diameter offers a predictable footprint at the mounting point, which fits well on common stile widths without crowding panel profiles or edge details. The 8-32 screw size specification ensures a uniform thread standard, which streamlines drilling and hardware prep on the shop floor or jobsite by matching existing processes built around this machine-screw size. The Rustic Iron finish callout lets designers and builders match this knob visually with other Rustic Iron pieces in the same area, which supports cohesive hardware selections across cabinets, furniture, or built-ins.
The P2011-RI knob has a 1-3/8 inch diameter and a 1 inch projection, so it presents a moderate face size with enough stand-off for everyday cabinet door and drawer use.
This Rustic Iron knob is zinc die cast, which provides a solid metal body suited to repeated pulling on cabinet doors and drawers in typical interior environments.
The Manchester knob has a 1 inch projection, which sets the gripping point off the door or drawer face to give practical finger clearance during operation.
The knob has a 3/4 inch base diameter, which creates a compact contact area that looks proportioned on common cabinet stiles and rails.
The P2011-RI knob uses an 8-32 screw size interface, which aligns with standard single-hole cabinet knob drilling that relies on this machine-screw thread.
The Rustic Iron finish gives the knob a darker iron-style look, which supports designs that call for traditional metal accents on cabinet faces.
The Hickory Hardware Manchester Series Rustic Iron 1-3/8 inch diameter knob unites a zinc die cast body, 1 inch projection, and 3/4 inch base diameter, which together deliver a predictable grip and footprint anywhere a single-hole cabinet knob is needed. The Rustic Iron finish and Manchester collection identity allow this knob to tie multiple doors and drawers into one hardware story on a job. For projects calling for a 1-3/8 inch round pull with an 8-32 screw size interface, this P2011-RI knob from Belwith Keeler aligns cleanly with standard cabinet layouts and drilling patterns across both residential and commercial casework.
Sold In: 1 Each
