Hickory Hardware Manchester pull describes a zinc die cast handle from the Manchester collection that is built for cabinet and furniture doors or drawers. The 3-3/4 inch (95 mm) center to center drilling sets the screw spread, so it fits layouts designed around this common hole spacing. The overall length of 4-1/8 inches gives the pull a balanced look on face frames and drawer fronts, helping layouts stay consistent across a run of cabinets. Its Vibra Pewter finish delivers a Venetian Bronze style tone, so it works where a darker, aged-metal look is part of the design scheme. A projection of 1-1/4 inches sets the hand clearance off the surface, giving enough room for fingers while keeping the pull tight to the door or drawer face. A width of 5/8 inch defines the grip profile, which helps installers align the pull visually with rail thicknesses and stile proportions.
The 3-3/4 inch (95 mm) center to center dimension on this Belwith Keeler pull dictates where mounting holes land, which helps installers drill accurately when working with jigs or templates. The specified screw size of 8-32 x 1 inch sets the thread and length requirements at the fastening points, giving a known match for standard cabinet door and drawer front thicknesses. Its 4-1/8 inch overall length provides clear end-to-end reference points, so aligning multiple pulls along rails or across drawer stacks stays straightforward. With a projection of 1-1/4 inches, the pull stands off the surface at a predictable distance, which matters when checking for clearance near moldings or adjacent doors. The 5/8 inch width allows the pull to sit comfortably on narrow stiles or smaller drawer fronts, giving flexibility in placement across different cabinet sizes.
The P2023-VP cabinet pull from the Hickory Hardware Manchester collection is suited to cabinet doors and drawers that call for a 3-3/4 inch (95 mm) center to center mounting pattern, which is common in kitchen, bath, and built-in work. Its Vibra Pewter finish, described as a Venetian Bronze style, lets it coordinate with other darker metals on the job, such as hinges or appliance finishes using similar tones. The 4-1/8 inch overall length works well on standard-width doors and medium drawers, giving enough span for a comfortable grip without overpowering smaller fronts. With a 5/8 inch width, the pull fits both framed and frameless cabinetry, since it does not crowd narrow stiles or edges. The zinc die cast construction supports use across a full installation where matching pulls are needed in quantity, such as entire bank runs or wall cabinet rows.
The defined 3-3/4 inch center to center drilling on this Belwith Keeler drawer pull keeps hole locations consistent, which is especially useful when using drilling jigs to repeat the same layout across multiple fronts. Its 1-1/4 inch projection ensures the hand clearance stays the same from cabinet to cabinet, helping maintain a uniform user feel throughout the space. The 4-1/8 inch overall length and 5/8 inch width create fixed visual proportions, so hardware lines stay straight and aligned when pulls are ganged across wide drawer banks. The specified 8-32 x 1 inch screw size sets a known fastening standard, which simplifies selecting or matching screws to typical cabinet door and drawer front thicknesses on the job. Because the pull is part of the Manchester collection, it helps installers and shop teams keep a consistent style language when combining this pull with other pieces from the same family.
The P2023-VP pull has a 3-3/4 inch (95 mm) center to center dimension, which sets the hole spacing and aligns with a common cabinet drilling standard for doors and drawers.
The Hickory Hardware Manchester pull measures 4-1/8 inches in overall length, providing a balanced footprint that works well across typical cabinet doors and medium-width drawers.
This Belwith Keeler cabinet pull is made from zinc die cast, giving it a solid, uniform body that supports consistent feel and finish across multiple installed pulls.
The P2023-VP cabinet pull uses a Vibra Pewter finish in a Venetian Bronze style tone, which suits projects calling for a darker, aged-metal appearance on cabinet hardware.
This Manchester pull has a projection of 1-1/4 inches, setting predictable hand clearance and helping maintain the same reach profile across all doors and drawers using it.
The P2023-VP cabinet pull uses 8-32 x 1 inch screws, establishing a standard thread and length that matches common cabinet door and drawer front thicknesses.
The Hickory Hardware Manchester pull in Vibra Pewter pairs a 3-3/4 inch (95 mm) center to center layout with a 4-1/8 inch overall length, giving a predictable footprint for new cabinets or refresh work. Its zinc die cast construction and defined 1-1/4 inch projection support consistent grip feel from one front to the next, which matters across full kitchens or built-ins. When a Venetian Bronze style tone is part of the hardware plan, this Belwith Keeler drawer pull offers a matching option that keeps drilling, proportions, and finish aligned across the project.
Sold In: 1 Each
