Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Manchester knob gives you a 1-1/4 inch diameter pull point in a compact, round design, so doors and drawers get a consistent hand feel and clear grip. The zinc die cast construction creates a solid metal knob body, which helps the knob feel substantial when operated repeatedly on working cabinets. A Vibra Pewter finish provides a muted metal tone on the surface, helping this knob sit comfortably on a range of cabinet colors without looking overly bright. The knob projection of 1-1/8 inch sets the hand clearance off the face of the cabinet, so fingers can wrap the knob without scraping the door. A base diameter of 5/8 inch defines the footprint where the knob meets the wood, which helps you understand how much face area the knob visually covers on narrow rails or smaller drawer fronts.
The 1-1/4 inch diameter on this Belwith Keeler knob defines the overall face size, so you can match it to drawer widths or door rail heights without guesswork. A projection of 1-1/8 inch controls how far the knob sits off the cabinet face, which matters when aligning with adjacent hardware or when doors open near walls or trim. The 5/8 inch base diameter sets the knob footprint against the wood, giving a clear sense of how it will sit on narrow frames. The specified 8-32 screw size signals the thread standard used for mounting, which aligns with a common cabinet drilling and tapping pattern in many shop setups.
The Hickory Hardware Manchester Series design positions this knob for use on cabinet doors and drawers where a traditional round profile is preferred. The 1-1/4 inch diameter makes it suitable for both wall and base cabinets, because the head size is large enough for a solid grip yet compact enough for smaller doors. With a projection of 1-1/8 inch, the knob stands off the surface enough to clear typical door edge profiles, which is helpful when cabinets have applied molding or profiled rails. The Vibra Pewter finish gives the knob its characteristic muted metallic appearance, so it can be used where a softer pewter tone is desired instead of highly polished hardware. The base diameter of 5/8 inch means the contact point on the cabinet face stays relatively tight, which suits narrow face frames or small drawer fronts while still providing a distinct visual anchor.
The zinc die cast material gives this PA1218-VP knob a uniform shape and weight from piece to piece, which supports consistent alignment when used across a full kitchen or bank of casework. The 1-1/4 inch diameter is clearly defined, allowing installers to repeat hole locations and visual spacing with confidence when laying out multiple doors and drawers. The 1-1/8 inch projection dimension helps plan clearances near adjacent knobs, pulls, or wall surfaces, reducing the chance of interference when doors swing or drawers extend. A 5/8 inch base diameter creates a predictable bearing surface against the wood, which helps the knob seat neatly on flat-faced cabinet designs. The specified 8-32 screw size aligns with a widely used hardware thread, which simplifies matching the knob to standard cabinet drilling practices and supports straightforward mounting in shop or onsite work.
The PA1218-VP knob has a 1-1/4 inch diameter head, a 1-1/8 inch projection, and a 5/8 inch base diameter, which together define its size, clearance, and footprint on the cabinet face.
The Manchester knob is made from zinc die cast material, giving it a solid metal body that supports a consistent feel and shape across multiple installed knobs.
The knob uses a Vibra Pewter finish, which establishes its pewter-toned appearance and helps it coordinate with other Vibra Pewter decorative hardware in a project.
This Vibra Pewter cabinet knob projects 1-1/8 inch from the cabinet surface, providing practical hand clearance and informing layout near adjacent hardware or walls.
The base of the knob measures 5/8 inch in diameter, defining the contact area on the door or drawer front and helping plan placement on narrow rails or stiles.
The PA1218-VP knob is part of the Hickory Hardware Manchester Series from Belwith Keeler, identifying its style family for matching with related knobs or pulls.
The Hickory Hardware Manchester knob in Vibra Pewter combines a 1-1/4 inch diameter head, 1-1/8 inch projection, and 5/8 inch base into a clearly defined cabinet knob format that suits doors and drawers. The zinc die cast construction and Vibra Pewter finish create a consistent, pewter-toned metal knob option for decorative hardware layouts. With its specified dimensions and 8-32 thread standard, this PA1218-VP knob offers a straightforward way to define grip size, clearance, and visual footprint across new cabinet builds or hardware updates.
Sold In: 1 Each
