SP-100 Strike Plate, Black

SP-100 Strike Plate Black For Lock Engagement

SP-100 strike plate black provides a defined strike point for cam, deadbolt, or wardrobe locks, creating a consistent surface for the lock bolt to seat so doors or panels close to the same position every time. This CompX Timberline Lock strike plate belongs to the strikes class, so it is designed as the fixed counterpart to the moving lock component in a lock and latch layout. The L style configuration creates a bent profile, letting the strike wrap the edge where the lock bolt meets it, which is useful when the frame or cabinet design calls for a right-angle engagement surface. A 5/16 lip dimension sets the reach of the strike edge from its mounting surface, which affects how the lock bolt meets the strike and helps align the lock throw with the door or drawer front.

Key SP-100 Strike Plate Black Details In Use

• For use with cam, deadbolt or wardrobe locks, this strike plate gives those lock types a reliable engagement point so one strike model can serve multiple lock styles in the same project.
• Strike plates are sold without screws, so the mounting setup can be matched to job standards while the strike itself stays focused on providing the correct lock contact surface.
• Use #6 x 1/2" panhead screws for mounting, which sets clear expectations for screw size and length so the plate seats properly against the mounting material.
• L style geometry with a 5/16 lip positions the working edge at a fixed offset, which helps align the lock bolt to the strike in common cabinet and wardrobe construction layouts.
• The black finish on this strike plate coordinates with black-faced lock bodies or trim, which can help maintain a consistent look at visible cabinet or wardrobe lock points.

Strike Plate Mounting And Alignment Details

This L style strike plate with a 5/16 lip mounts so that one leg fastens to the case or frame while the other leg forms the lock contact edge, letting the plate bridge a corner where the bolt travels. Using #6 x 1/2" panhead screws sets the clamping range and head profile, which helps the plate sit flat while still gripping into typical cabinet stock. When paired with cam, deadbolt, or wardrobe locks, the fixed lip dimension gives a known reference from the mounting surface to the strike edge, helping installers position the lock body so the bolt meets the strike without binding.

How This Strike Plate Serves Lock Layouts

Where The SP-100 Strike Plate Black Fits

This CompX Timberline strike plate is part of the locks and latches family as a lock accessory, so it is intended to work alongside cam, deadbolt, or wardrobe locks in cabinet or wardrobe-style constructions. The L style format lets the plate sit around a corner, so it can be placed on a cabinet face frame, side panel, or wardrobe case edge where the lock bolt approaches at a right angle. With its 5/16 lip, the strike edge projects from the mounting plane by a predictable amount, giving lock layout drawings a fixed dimension from screw line to bolt contact point, which is useful when repeating the same layout across multiple doors.

Why The L Style 5/16 Lip Design Matters

The L style shape creates two perpendicular surfaces, one for fastening and one for bolt contact, so the plate can be located precisely where the lock throw needs a clean metal edge to seat against. The 5/16 lip dimension defines how far that edge stands off the mounting surface, which influences the gap between the door or drawer front and the frame when the lock is engaged. Using #6 x 1/2" panhead screws keeps fastener heads low while providing enough thread length to hold the plate steadily, which helps the strike resist shifting under repeated locking cycles. Working with cam, deadbolt, or wardrobe locks, this consistent geometry simplifies layout, because once one lock and strike pair is positioned correctly, the same measurements can be carried across repeated cabinets or wardrobe compartments.

Common SP-100 Strike Plate Black Questions

Selecting The SP-100 Strike Plate Black For Locks

Choosing the SP-100 strike plate black ties cam, deadbolt, or wardrobe locks to a defined strike geometry, with its L style shape and 5/16 lip setting bolt engagement. With #6 x 1/2" panhead screws specified, mounting details are straightforward, so this CompX Timberline strike works as a clear, repeatable component in locks and latches layouts.