Strike Plates for Cam, Deadbolt or Wardrobe Locks 7/8"W x 3/4"D x 5/16"H, Bright Nickel

Strike Plate Bright Nickel For Lock Alignment

Strike plate bright nickel from CompX Timberline Lock is an L style strike plate sized 7/8 inch wide, 3/4 inch deep, and 5/16 inch high, so it provides a defined landing point for the lock bolt and helps control door or panel closure. The 5/16 lip noted in the description gives a consistent edge for the bolt to engage, which supports repeatable latching when you are building or servicing cabinets and wardrobes. Bright nickel finish on the strike presents a clean, metallic surface that pairs with bright nickel lock bodies, helping projects look uniform when doors are open. The strike plate is designed for use with cam, deadbolt or wardrobe locks, so one part number can support several locking styles across the same job, simplifying bench stock. As a product in the Locks and Latches category and the Strikes product class, it works as the fixed catch side of the lock set in the assembly.

Key Strike Plate Bright Nickel Details For Jobs

• The manufacturer identifies this part as SP-100-1 and describes it as an L style strike plate with a 5/16 lip, which helps you match the correct profile when you need consistent bolt engagement on doors or drawers across multiple cabinets.
• Dimensions of 7/8 inch width, 3/4 inch depth, and 5/16 inch height define a compact footprint, so the strike fits neatly at the cabinet frame or panel edge while still presenting enough surface for reliable cam or deadbolt contact.
• For use with cam, deadbolt or wardrobe locks means the same strike plate can serve different lock types, which can reduce part variation on a project and help streamline layout when you standardize on one lock family.
• The bright nickel finish aligns with bright nickel lock components from CompX Timberline Lock, supporting a coordinated appearance around doors and drawers where hardware is visible during normal cabinet use.
• Strike plates are sold without screws, and the web description specifies use of #6 x 1/2 inch panhead screws, which gives a clear fastener specification when you are preparing your hardware pull list for installation.

Strike Plate Bright Nickel Fit And Mounting Use

The web description states that this strike plate is for use with cam, deadbolt or wardrobe locks, so it is intended to be installed opposite the lock body where the rotating cam or sliding bolt needs a solid strike surface. The L style geometry with a 5/16 lip gives a formed edge that the lock element meets, which helps guide the bolt into position when the door or panel closes. Dimensions of 7/8 inch by 3/4 inch by 5/16 inch create a small, repeatable form factor that works well at cabinet and wardrobe edges, allowing you to position the strike consistently from opening to opening. Using the specified #6 x 1/2 inch panhead screws ties the strike securely to wood or similar substrates, so the lip stays stable under repeated locking cycles in everyday use.

Using This Strike Plate Bright Nickel In Workflows

Where This L Style Strike Plate Fits Best

This CompX Timberline Lock strike plate is identified specifically for use with cam, deadbolt or wardrobe locks, so it fits projects where those lock types are installed in cabinet doors, wardrobe doors, or similar casework. The 7/8 inch width and 3/4 inch depth keep the strike compact along the face or jamb, which suits face-frame and frameless cabinet construction where space near the edge is limited. With a 5/16 inch height and 5/16 lip, the profile is shallow enough to sit close to the surface while still rising enough to catch the cam or bolt travel, helping doors draw tight when locked. As a member of the Locks and Latches category and the Strikes product class, it functions as the stationary partner to the moving lock component, so it is positioned on the fixed cabinet part while the cam or deadbolt is mounted on the door or moving panel.

How Strike Plate Details Support Consistent Results

The SAP description calling out L style and 5/16 lip indicates a bent plate profile that presents a positive stop for the lock component, so each turn of the key or knob pulls the panel into the same closed position. Using the same SP-100-1 strike plate across multiple openings with cam, deadbolt or wardrobe locks gives you a standardized engagement point, which can reduce adjustment time during installation because the lock hardware sees the same geometry at every location. The bright nickel finish ties visually to bright nickel lock cylinders and trims from CompX Timberline Lock, which helps maintain a unified appearance on commercial or residential casework when interiors are visible. Specifying #6 x 1/2 inch panhead screws means the mounting holes and plate thickness are intended for that screw size and length, supporting a flush seat of the screw head against the plate for a tidy installation. By working with the stated 7/8 inch by 3/4 inch by 5/16 inch dimensions, installers can lay out mortise or placement clearances so the strike edge aligns with the cam or deadbolt throw path, reducing rework during fit-up.

Common Questions About This SP-100-1 Strike Plate

Select This Strike Plate Bright Nickel For Lock Jobs

This CompX Timberline Lock SP-100-1 strike plate combines an L style 5/16 lip profile with 7/8 inch by 3/4 inch by 5/16 inch dimensions, so it delivers a predictable contact point for cam, deadbolt or wardrobe locks. The bright nickel finish aligns with bright nickel lock hardware, supporting a clean look on cabinet and wardrobe projects. With the web description calling out use of #6 x 1/2 inch panhead screws, tradespeople and serious DIY users can plan fastening to match the plate design. For projects sourced through Wurth Baer Supply, this strike plate fits into lock and latch hardware schedules that rely on consistent, cataloged components.