Salice Self-Close Pie Cut Corner Hinge Use

Salice self-close pie cut corner hinge gives you a 70 degree opening, which lets connected corner doors swing in a controlled arc so the pie-cut layout works smoothly in both residential and commercial cabinets. This Salice Series 200 hinge is part of an integrated system of concealed hinges, so it keeps hardware hidden while delivering consistent self-closing action on face-frame and frameless cabinets. The concealed design supports clean cabinet fronts, which matters when you are matching modern or high-end millwork. As a concealed cabinet hinge in a pie cut corner application, it manages the joint between two doors, which helps maintain tight reveals and predictable movement in corner units. Being a self-closing hinge, it pulls the doors shut at the end of travel, which reduces door bounce and helps doors seat firmly against the cabinet.

Key Salice C2PYA99 Details For Cabinet Projects

• Series 200 70 degree self-closing design controls the opening angle, which is important for pie cut corner doors that must clear adjacent cabinetry without over-swing.
• Pie cut corner hinge classification targets corner cabinet doors, giving you a purpose-built hinge geometry for that joint instead of adapting a standard hinge.
• Concealed hinge format keeps the mechanism out of sight, supporting clean lines on both residential and commercial cabinet installations.
• Steel hinge construction provides a solid mechanical base, and the nickel plated finish adds corrosion resistance for long-term cabinet service.
• Permanent self lubricating operation with environmentally safe lubricants helps maintain smooth movement over time, reducing hinge noise and stickiness during repeated use.
• Lifetime warranty on these hinges reflects the manufacturer's confidence, which matters when you are installing hardware in projects that must last.

Salice Screw-On Pie Cut Hinge Fit And Setup

This Salice Series 200 pie cut corner hinge uses a screw-on cup fastening design, so it mounts to the door with two #6 x 5/8 inch screws at the hinge cup. The cup depth is only 11 mm, which helps the hinge work with most cabinet door profiles without cutting excessively deep into the door. A hinge cup edge drilling distance of 3 mm to 6 mm gives flexibility in locating the cup relative to the door edge, which is useful when matching existing layouts or balancing reveals. The hinge provides patented parallel side-to-side adjustment from plus 4.5 mm to minus 1.5 mm via a hinge arm screw, allowing fine tuning of door position after mounting so you can tighten up gaps and align adjoining doors.

Using This Concealed Pie Cut Corner Hinge

Where This Salice Corner Hinge Performs Best

As a pie cut corner hinge designed for both residential and commercial cabinets, the Salice C2PYA99 serves where two doors connect to form a corner front. In kitchens, the 70 degree self-closing action manages the swing of the connected doors so they open enough for access while respecting surrounding cabinet runs. In office or commercial millwork, the concealed cabinet hinges support a clean appearance while still providing controlled motion on corner units. The concealed European long arm format suits projects that specify European concealed cabinet hinges, allowing the hardware to sit entirely inside the cabinet envelope when the doors are closed. Because it is part of an integrated system of hinges developed for concealed applications, this hinge fits into jobs that standard exposed hinges would visually disrupt.

Details That Support Alignment And Repeatable Results

The Salice Series 200 pie cut corner hinge uses a patented parallel side-to-side adjustment range of plus 4.5 mm to minus 1.5 mm through the hinge arm screw, which lets you shift the door pair horizontally without remounting, saving time during final alignment. The 11 mm cup depth, paired with a 3 mm to 6 mm cup edge drilling distance, offers a drilling geometry that works with most cabinet door profiles, helping installers stay within familiar boring patterns while achieving proper seating. Nickel plated steel construction adds corrosion resistance around the hinge cup and arm, which supports repeatable motion in everyday cabinet environments. Exceeding ANSI/BHMA Grade 2 standards gives this hinge a performance benchmark, so it can serve in higher-use residential or commercial settings. Meeting ISO9001 and ISO14001 environmental certifications means the hinge is produced under defined quality and environmental systems, supporting consistent output across multiple installs on the same project.

Common Questions About Salice C2PYA99 Hinge Use

Selecting This Salice Pie Cut Corner Hinge

Choosing this Salice self-close pie cut corner hinge gives you a 70 degree concealed solution specifically developed for corner cabinet doors in residential and commercial projects. With its screw-on cup design, 11 mm cup depth, and adjustable hinge arm, it supports accurate drilling, solid mounting, and post-install alignment. The nickel plated steel construction, permanent self lubricating action, and lifetime warranty position this hinge as a dependable option when you want controlled self-closing motion and clean cabinet fronts on corner units. Match this hinge to pie cut corner layouts where a concealed, adjustable, self-closing hinge is required.