Domi Cam Mounting Plate For Precise Face Frames

Domi Cam Adjustable Face Frame Mounting Plate defines this Salice America hinge base plate as a 4mm screw-on solution for face frame applications, so installers can match overlays that call for this specific thickness while keeping hinge geometry consistent across a run. Constructed of stamped steel with nickel plating to resist corrosion, the plate provides a solid, long-term mounting surface that stands up in typical cabinet environments where metal stability and surface protection matter. As part of the Salice America hinge mounting plates range, it fits into projects that standardize around this brand and class of hardware, supporting consistent hardware choices across multiple jobs. The hinge mounting plate classification also means it is designed to work as the interface between the cabinet face frame and compatible hinge arms, giving you a defined reference point for door alignment. With a 4mm plate option within a series available in 0mm to 4mm thickness for overlay applications, this part supports overlay configurations that require a 4mm build-out from the frame, helping align doors where that offset is specified.

Key Mounting Plate Details That Speed Setup

• Constructed of stamped steel with nickel plating to resist corrosion, the plate offers a rigid, corrosion-resistant base that helps keep hinge locations stable over time in typical cabinet use.
• Single cam plates provide -0.5 mm to +2.8 mm cam depth adjustment, giving fine front-to-back positioning of the hinge arm relative to the frame so door gaps can be tuned within that range.
• The same single cam design keeps depth adjustment controlled from one point, which simplifies repeat adjustments across multiple doors when matching reveals from cabinet to cabinet.
• +/-2 mm of manual elongated screw hole height adjustment allows limited up-and-down movement of the plate on the face frame, helping correct small drilling or layout variations after the plate is fastened.
• Available series thicknesses from 0 mm to 4 mm for overlay applications mean this 4mm plate fits into a defined system, supporting overlay planning where different carcass and door layouts call for specific plate heights.

Screw-On Face Frame Mounting For Hinge Plates

The screw-on design of this Salice America face frame mounting plate means it is fastened to the frame with screws through the plate, which gives a direct mechanical connection that installers can drive straight into wood face frames during hinge layout. Because the plate provides -0.5 mm to +2.8 mm cam depth adjustment, the installed position can be fine-tuned front-to-back after the screws are set, so initial drilling does not have to carry all of the alignment burden. The +/-2 mm manual elongated screw hole height adjustment adds limited vertical play while the screws remain in the plate slots, so doors can be shifted up or down within that band before final tightening, which is helpful when aligning doors across wider banks. With a 4mm thickness defined for overlay applications, this plate establishes a consistent stand-off dimension once fixed to the frame, forming a predictable base for the hinge arm.

How This 4mm Mounting Plate Works In Practice

Using The BAU3L49 Plate On Face Frame Jobs

The Salice America BAU3L49 hinge mounting plate is a 4mm face frame screw-on plate, so it is suited to cabinet layouts where the face frame requires that 4mm plate height to reach the planned overlay. Since the web description confirms it as constructed of stamped steel with nickel plating to resist corrosion, it pairs well with environments where metal hardware is routinely exposed to normal indoor humidity and handling, supporting long-term hinge stability. Within a product class defined as hinge mounting plates and a category of Hinges|Hinge Base Plates, this component is intended to serve as the structural connector between cabinet face frames and hinge arms, making it part of the core door-hanging hardware set on a cabinet run. When an installation uses hinge arms engineered for this Salice America system, the 4mm thickness sets a repeatable reference for door positioning relative to the frame line. Across a shop or jobsite, using a mounting plate that sits within an available 0 mm to 4 mm thickness series for overlay applications helps standardize drawings and drilling patterns when jobs specify varying overlays.

Adjustment Features That Help Door Alignment

The single cam plates provide -0.5 mm to +2.8 mm cam depth adjustment, which means the hinge arm position relative to the face frame can be adjusted forward or backward within nearly 3.3 mm of range after installation, letting installers close small reveal gaps without re-drilling. Because depth is controlled by a single cam, the adjustment can be repeated consistently across all doors on a project, supporting uniform reveals and easing service work when doors are later tuned. The +/-2 mm of manual elongated screw hole height adjustment allows the plate to slide slightly up or down while mounting screws are in place, so an entire row of doors can be brought into height alignment using that 4 mm total vertical window instead of relocating holes. In combination, these two adjustment methods give separate control over depth and height at the mounting plate, so hinge arms can be set on a stable, nickel-plated stamped steel base while still allowing practical fine-tuning in the field. The 4mm plate thickness for overlay applications then locks in the stand-off dimension once adjustments are set, tying depth and overlay together for a predictable cabinet door fit.

Common Questions About This Salice Mounting Plate

Select This 4mm Plate For Overlay Projects

This Domi Cam Adjustable Face Frame Mounting Plate from Salice America combines a 4mm thickness for overlay applications with screw-on mounting, so cabinet projects using that stand-off can be set up on a defined hardware standard. With stamped steel construction and nickel plating to resist corrosion, it supports long-term hinge alignment on face frames where daily door use is expected. The combination of -0.5 mm to +2.8 mm cam depth adjustment and +/-2 mm manual elongated screw hole height adjustment provides workable tuning room for installers who want controlled, repeatable reveals. For projects requiring a 4mm face frame hinge base within a known 0 mm to 4 mm overlay series, this plate is suited to being specified as the mounting reference.