Zinc Finish Ball Bearing Drawer Slides Built for High-Volume Cabinet Work

The Knape and Vogt 8417 series is a 16 inch full-extension side-mount ball bearing drawer slide in a bright zinc finish, rated 100 lb per pair, with a hold-in detent that keeps the drawer closed until pulled. Sold in a Bulk-Pack for shops and contractors working through cabinets in quantity.

Key Features

• Bright zinc finish provides standard indoor corrosion resistance and a clean, neutral look that disappears inside most cabinet interiors.
• Full extension brings the entire drawer out to the cabinet face so the contents at the back are fully reachable.
• 100 lb load rating per pair covers kitchen, bathroom, and utility drawers through everyday use cycles.
• Hold-in detent keeps the drawer firmly closed and prevents it from drifting or bouncing back open after being pushed shut.
• Non-handed design means the same slide fits either side of the drawer, cutting sorting time on a busy bench.
• Bulk-Pack packaging keeps unit cost down for shops building multiple cabinets at once.

What the Hold-In Detent Does on the Job

The hold-in detent on the 8417 series is a mechanical catch, not a spring-close or a damper. It holds the drawer in the closed position so it does not drift open on its own and does not rebound after a firm close. A normal pull releases it. This makes the 8417 a practical choice for kitchen base cabinets, bathroom vanities, and utility drawers where the drawer needs to stay shut between uses without requiring soft-close hardware. It is a standard-motion slide in every other respect: the drawer rolls on ball bearings and stays wherever it is left when open.

Zinc Finish in a Production Environment

Zinc plating is the working standard for side-mount ball bearing slides, and the 8417 series carries it across the full steel construction. The bright zinc finish blends into finished cabinet interiors without drawing attention and holds up to years of indoor use. It is not a decorative finish and is not rated for exterior or high-humidity environments. For installations where the slide finish needs to match a dark or white cabinet interior, siblings in this family are available in Ebony Black and White epoxy finishes.

Where These Slides Fit Best

The 8417 in 16 inches suits shallower cabinet runs: base cabinets with shorter drawer boxes, bathroom vanities, and shop storage where the drawer depth is in the 14 to 16 inch range. The 100 lb per-pair rating handles loaded kitchen drawers and moderate utility use. Cabinet shops running production frameless cabinetry will find the non-handed design and Bulk-Pack format reduce handling time at the bench. In face-frame cabinet builds, the rear of the slide needs support — add the appropriate KV rear mounting brackets, sold separately, to keep the back end of the slide from racking.

A Practical Zinc Slide That Keeps Production Moving

When the spec calls for full extension, a stay-closed detent, and a zinc finish at production volume, the KV 8417 series in 16 inches checks every box without the cost of soft-close hardware — a straightforward choice for cabinet shops that want reliable performance and efficient ordering.