
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
20 inch KV185 shelf bracket from Knape and Vogt is a heavy-duty double slot shelf bracket designed for use in shelf, closet, and garage organization projects where strong, repeatable support is required. The bracket is part of the KV Model KV185 line, so it fits into a consistent system approach across different shelf lengths in the same installation. This model is typically used with the KV85 series standard, tying the bracket directly into a known upright standard for stable vertical support. The white finish gives a clean look that blends well in closet and residential storage layouts while still suiting organized shop or light commercial spaces. As a shelf standards and brackets component, it plays the structural role in the assembly, carrying the shelf and its contents so other trim work stays under less stress.
KV185 heavy-duty double slot shelf bracket is typically used with the KV85 series standard, so the interface between bracket and upright is predefined for installers planning multiple bays. Vertically adjustable in 1 inch increments, the bracket allows shelves to be repositioned along the standard without altering the underlying structure, saving time during layout changes. The three engagement teeth create a positive connection into the standard and at shelf lips at the end of the bracket, which supports alignment under load. With lengths in the broader KV185 line ranging from 8 to 24 inches, a project can mix depths while keeping a consistent mounting method, simplifying both installation and later modifications.
KV Model KV185 heavy-duty double slot shelf bracket is part of the shelf, closet, and garage organization category, so it is suited to storage runs in those environments where structured standards and brackets are preferred. In closets, the white finish helps the 20 inch KV185 shelf bracket visually recess under typical white shelving, maintaining a tidy appearance while still supplying structural support. In garage or utility storage, the weight rating of 320-680 lb per pair, depending on length, allows planners to assign heavier storage to deeper KV185 brackets in the same family while keeping lighter items on shorter lengths. Because the bracket is vertically adjustable in 1 inch increments, a single section of KV85 series standard can support varied shelf heights for shoes, bins, or tools without reorganizing the full wall layout once standards are fastened.
The KV185 heavy-duty double slot configuration uses three engagement teeth for secure mounting to the KV85 series standard and to shelf lips at the end of the bracket, which helps keep shelves seated when loaded or when items are slid on and off. The 20 inch length in the KV185 line fits within the available 8, 10, 12, 14, 16, 18, 20, 22, and 24 inch range, so installers can standardize on the same bracket model across different shelf depths while retaining predictable support characteristics. Across this line, material construction shifts from 16-gauge steel on 8-12 inch lengths to 14-gauge steel on 14-24 inch lengths, aligning heavier-gauge material to longer brackets that may see greater bending loads in service. The available finishes of anochrome and white in the KV185 range give design options, while the specific 20 inch KV185 shelf bracket in white targets projects that require a light, clean look with the benefit of a defined structural rating.
The 20 inch KV185 heavy-duty double slot shelf bracket is a shelf standards and brackets component, so it is intended to support shelving in organized storage systems.
The KV185 shelf bracket is typically used with the KV85 series standard, which means its engagement profile is designed around that upright system for consistent support.
The KV185 bracket line has a weight rating of 320-680 lb per pair, based on length, so load planning can match shelf duties to specific bracket sizes.
The KV185 bracket is vertically adjustable in 1 inch increments, which allows shelf heights to be shifted to fit stored items while the standards remain fixed.
KV185 brackets from 8-12 inches use 16-gauge steel, while 14-24 inch brackets use 14-gauge steel, aligning heavier material with longer spans that may see higher bending forces.
The KV185 bracket family is available in anochrome and white finishes, providing options for visible closet or storage installations that must match surrounding components.
The 20 inch KV185 heavy-duty double slot shelf bracket in white finish from Knape and Vogt ties directly into the KV85 series standard, so it supports organized runs of shelving with known load ratings and 1 inch vertical adjustment steps. For projects needing a 20 inch deep shelf position within a broader KV185 layout, this model provides the defined span and engagement teeth that help keep shelves aligned under working loads. Choosing this bracket lets planners stay within the same KV185 system across multiple shelf depths while matching the white look expected in many closet and finished storage installations.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KV85WH-24 Mfr# 85 WH 24 | 24" DOUBLE SLOT STANDARD WHITE, 85 WH 24 | ||||
Sold in: 1 Each | KV85WH-36 Mfr# 85 WH 36 | Heavy Duty Shelf Standards Double Slotted - Knape And Vogt 85 WH 36 | ||||
Sold in: 1 Each | KV85WH-48 Mfr# 85 WH 48 | 48" KV85 Heavy-Duty Double Slot Shelf Standard, White Finish | ||||
Sold in: 1 Each | KV85WH-60 Mfr# 85 WH 60 | 60" KV85 Heavy-Duty Double Slot Shelf Standard, White Finish | ||||
Sold in: 1 Each | KV85WH-72 Mfr# 85 WH 72 | 72" KV85 Heavy-Duty Double Slot Shelf Standard, White Finish | ||||
Sold in: 1 Each | KV85WH-84 Mfr# 85 WH 84 | 84" KV85 Heavy-Duty Double Slot Shelf Standard, White Finish | ||||
Sold in: 1 Each | KV85WH-96 Mfr# 85 WH 96 | 96" KV85 Heavy-Duty Double Slot Shelf Standard, White Finish |