
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
KV185 heavy duty shelf bracket from Knape and Vogt is a 20 inch double slot shelf bracket in an anochrome finish designed for demanding shelf support runs. This bracket is part of the KV185 model line, which is typically used with the KV85 series standard. That pairing creates a standardized support system, helping installers build straight, repeatable shelf runs across closets, garages, and storage walls. The bracket sits in a double slot standard, so it engages more steel and spreads load over a wider area than a single slot design. This KV185 bracket is classified as heavy duty, and the model line carries a weight rating of 320-680 lb per pair, depending on length. That rating gives installers a known performance envelope when planning shelf span, load, and standard spacing in residential or light commercial projects.
The KV185 heavy duty double slot shelf bracket is designed to work with KV85 series standards, so once the standards are mounted plumb, brackets hang directly into the double slots. Vertically adjustable 1 inch increments let installers fine tune shelf spacing by simply relocating the brackets along the upright. Three engagement teeth connect into the standard and shelf lips at the end of the bracket, which helps the shelf seat consistently against the standard and reduces movement under load. The weight rating of 320-680 lb per pair for the KV185 line gives installers a load-planning reference when they position standards along long shelves. The anochrome finish coordinates with anochrome standards, creating a unified appearance on exposed storage walls and closet interiors.
The 20 inch KV185 heavy duty shelf bracket in anochrome is part of the shelf standards and brackets category, so it targets closet, garage, and general storage applications where standards are already part of the design. Because this KV185 is a double slot bracket typically used with KV85 series standards, it fits projects built around that upright system, from single closet walls to multi-bay storage runs. The 20 inch length suits deeper shelves, such as utility shelving and garage storage, where extra projection supports larger items. The anochrome finish visually pairs with anochrome standards in the same system, which keeps the hardware consistent along a run. Installers working in woodworking-focused shops also gain a familiar component that aligns with common Knape and Vogt layouts.
The KV185 heavy duty double slot shelf bracket line carries a weight rating of 320-680 lb per pair, depending on length, which provides a defined structural range when installers repeat shelf spans across multiple bays. Vertical adjustment in 1 inch increments lets installers move shelves up or down without reworking the standards, making it easier to adapt a standard layout to different contents. The three engagement teeth on each bracket tie into the standard and shelf lips at the end of the bracket, supporting consistent positioning across brackets and helping the shelf seat squarely. Using this KV185 bracket with KV85 series standards means the same upright, slot spacing, and finish can carry from one project to the next, which can streamline estimating and installation routines. In combination, the heavy duty rating, double slot engagement, and standardized interface support predictable performance in everyday storage installations.
The KV185 20 inch model is a heavy duty double slot shelf bracket, so it engages a matching double slot standard and is intended for higher load storage applications.
The KV185 bracket is typically used with the KV85 series standard, creating a matched bracket-and-standard system for building repeatable shelf layouts.
The KV185 shelf bracket line has a weight rating of 320-680 lb per pair, depending on length, which provides a defined load reference for planning shelf spans.
The KV185 bracket is vertically adjustable in 1 inch increments, so shelf height changes are done by relocating brackets along the standard without altering the uprights.
The anochrome finish on the KV185 bracket matches common anochrome standards, helping the hardware present a consistent appearance across closet and storage installations.
The KV185 bracket has three engagement teeth that connect to the standard and shelf lips at the end of the bracket, promoting secure seating and reducing movement under load.
The 20 inch KV185 heavy duty double slot shelf bracket in anochrome gives installers a defined piece of the Knape and Vogt shelving system, with a weight rating of 320-680 lb per pair across the line and 1 inch vertical adjustment. Using this bracket with KV85 series standards aligns the upright and bracket interface, supporting consistent layouts on recurring closet, garage, and storage projects. For woodworking professionals sourcing from Wurth Baer Supply, this model ties directly into established shelf, closet, and garage organization workflows.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KV85A-24 Mfr# 85 ANO 24 | 24" KV85 Heavy-Duty Double Slot Shelf Standard, Anochrome Finish | ||||
Sold in: 1 Each | KV85A-36 Mfr# 85 ANO 36 | 36" KV85 Heavy-Duty Double Slot Shelf Standard, Anochrome Finish | ||||
Sold in: 1 Each | KV85A-48 Mfr# 85 ANO 48 | 48" KV85 Heavy-Duty Double Slot Shelf Standard, Anochrome Finish | ||||
Sold in: 1 Each | KV85A-60 Mfr# 85 ANO 60 | 60" KV85 Heavy-Duty Double Slot Shelf Standard, Anochrome Finish | ||||
Sold in: 1 Each | KV85A-72 Mfr# 85 ANO 72 | 72" KV85 Heavy-Duty Double Slot Shelf Standard, Anochrome Finish | ||||
Sold in: 1 Each | KV85A-84 Mfr# 85 ANO 84 | 84" KV85 Heavy-Duty Double Slot Shelf Standard, Anochrome Finish | ||||
Sold in: 1 Each | KV85A-96 Mfr# 85 ANO 96 | 96" KV85 Heavy-Duty Double Slot Shelf Standard, Anochrome Finish |