Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
KV85 double slot shelf standard from Knape and Vogt provides a heavy-duty vertical track for adjustable shelving, so closet, garage, or shop layouts can be reconfigured in 1 inch steps without rebuilding wall framing or cabinet sides. This 72 inch shelf standard is 1-1/4 inch wide by 1/2 inch deep, giving a compact profile that still carries loads when paired with matching double brackets along a stud run or cabinet panel. The standard is made from 16-gauge steel, which resists bending under bracket loads and helps keep multiple shelves aligned on long wall sections. An anochrome finish covers the steel, giving a neutral, jobsite-ready appearance that blends with typical closet and storage hardware. The standard is identified as KV Model KV85 and manufacturer part 85 ANO 72, which keeps reorders consistent when matching existing installations.
This KV85 shelf standard uses screw holes spaced 12 inches apart on center, so it can align with typical stud spacing patterns and spread load down the wall or cabinet panel. The standard is designed for use with #10 flathead wood screws as the recommended fasteners, allowing the screw heads to sit flush in the countersunk holes and keep the bracket path clear. Because the standard is only 1/2 inch deep, it sits close to the mounting surface, which helps brackets carry loads tight to the wall and reduces leverage on the screws. Using the 72 inch length allows multiple bracket positions above and below eye level on a single piece, minimizing seams in tall installations.
This 72 inch KV85 heavy-duty double slot shelf standard is part of the Knape and Vogt shelf standards and brackets system, fitting into shelf, closet, and garage organization layouts that call for vertical adjustability. It is typically used with KV185 series double brackets, so installers can build matched runs where brackets lock into the same double slot pattern along the wall. Because the standard can be used with any KV double slotted brackets, it supports a range of shelf depths and uses within the same vertical track. Available lengths for this model line run from 24 inch through 96 inch, and the 72 inch size fits mid-height walls or tall cabinet interiors without cutting. The same model is offered in both anochrome and white finishes, which lets storage projects match the color tone used on adjacent standards or trim for a consistent look.
The KV85 designation identifies this standard as part of an adjustable system with slots on 1 inch centers, which means every bracket position repeats predictably across multiple tracks for level shelves. Double slot construction gives two engagement points for KV185 series double brackets, helping brackets register square and reducing tilt when shelves are loaded. Screw holes set 12 inches apart on center allow a steady fastening pattern, which helps keep the standard plumb and secure while installers shift brackets up or down. The 16-gauge steel body maintains its form as brackets are moved between positions, which supports long-term reconfiguration of closet or garage layouts without replacing the standard. With a 1-1/4 inch wide face, each standard provides enough surface for installers to align brackets visually from track to track, making it easier to keep shelving straight along an entire wall section.
The 85 ANO 72 is a 72 inch KV85 heavy-duty double slot shelf standard from Knape and Vogt, so it functions as the vertical track that supports adjustable shelving using matching double brackets.
This KV85 shelf standard is typically used with KV185 series double brackets, allowing brackets to lock into the double slots and create adjustable shelving along the mounted track.
This KV85 standard can be used with any Knape and Vogt double slotted brackets, giving flexibility to select bracket styles and depths while staying within the same slot pattern.
The KV85 shelf standard has slots adjustable in 1 inch increments, so brackets can be moved up or down one slot at a time to fine-tune shelf height for different storage needs.
This shelf standard is designed for #10 flathead wood screws as the recommended fasteners, allowing the screw heads to sit flush in the holes and keep the slot area clear for brackets.
The KV85 standard is made from 16-gauge steel with an anochrome finish, providing structural strength along the run and a neutral appearance that coordinates with typical storage hardware.
The 72 inch KV85 double slot shelf standard in anochrome finish combines 16-gauge steel construction, 1 inch increment adjustment, and 12 inch on-center screw holes for practical setup of closet, garage, or shop shelving. Using the KV85 model with KV185 series or other Knape and Vogt double slotted brackets keeps projects aligned with a proven shelf standards and brackets system. For projects that need tall, reconfigurable storage along walls or inside cabinetry, this 1-1/4 inch wide by 1/2 inch deep standard offers a compact, consistent track that supports repeated shelf changes without replacing the vertical hardware.
Sold In: 1 Each
