Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
KV85 heavy-duty double slot shelf standard from Knape and Vogt is a 48 inch vertical standard that supports adjustable shelving layouts in closets, garages, or storage runs that fall within this length. The 1-1/4 inch wide by 1/2 inch deep profile provides a compact face while still giving enough bearing surface for typical shelf brackets in this series. The standard is made from 16-gauge steel, which offers a robust section for repeated bracket repositioning without deforming under normal use. An anochrome finish provides a neutral metallic look that works alongside common closet and shop hardware finishes. This model is part of the KV Model KV85 family, so it slots into established Knape and Vogt double-slot systems where that model is already specified. The 48 inch length helps installers cover mid-height wall sections while managing material use on shorter bays.
This KV85 48 inch standard is drilled so screw holes are spaced 12 inches apart on center, which lines up well with common stud spacing patterns when planning a run across a framed wall. The standard is designed to work with #10 flathead wood screws as the recommended fasteners, so the screw heads sit flush in the countersunk holes and allow brackets to seat flat against the face. The double slot pattern accepts any KV double slotted brackets, which gives flexibility in choosing bracket styles while retaining a consistent mounting backbone. In practice, the standard is generally used with the KV185 series double brackets, keeping shelves tied to a matched Knape and Vogt bracket family.
This 48 inch KV85 heavy-duty double slot shelf standard fits projects where vertical space falls in the 4 foot range, such as reach-in closets or garage wall segments that do not require ceiling-to-floor standards. The 1-1/4 inch wide by 1/2 inch deep profile lets it mount along cabinet interiors or directly to studs without taking much face space, which is helpful when space between items on the wall is tight. Because the slots are adjustable in 1 inch increments, installers can set shelf elevations to match hanging rods, bins, or existing cabinetry with small but consistent changes in height. Being part of the KV Model KV85 line, the standard works in systems already using this pattern, allowing a new 48 inch piece to extend or modify an existing run while keeping the same bracket interface.
The screw holes spaced 12 inches on center give a regular attachment pattern that follows typical stud spacing, which helps keep multiple standards in a straight line across a wall without extra layout work. Using the recommended #10 flathead wood screws keeps the hardware seated within the countersunk areas, so double slotted brackets sit flat and do not rock on raised screw heads. The ability to use any KV double slotted brackets means the same 48 inch KV85 standard can carry different bracket depths or styles across a project, while the double slot geometry keeps bracket engagement consistent for alignment. The heavy-duty 16-gauge steel body resists twisting between fasteners, which is valuable when aligning several standards so bracket arms line up level from one bay to the next. The anochrome finish also provides a uniform surface that makes layout marks and bracket positions easy to see during installation and later adjustment.
The KV85 heavy-duty double slot shelf standard can be used with any KV double slotted brackets and is generally used with the KV185 series double brackets, supporting consistent Knape and Vogt layouts.
This version of the KV85 shelf standard is 48 inches long, matching wall areas around 4 feet high where multiple adjustable shelf levels are needed within that span.
The KV85 shelf standard profile measures 1-1/4 inches wide by 1/2 inch deep, offering a slim vertical track that still gives adequate support area for double slotted brackets.
The 48 inch KV85 shelf standard is made from 16-gauge steel, providing a sturdy structure that supports repeated bracket adjustments and typical shelf loads in closet or garage settings.
This KV85 shelf standard uses #10 flathead wood screws as the recommended fasteners, so screws sit flush in the holes and allow brackets to sit flat against the face.
On this KV85 shelf standard, screw holes are spaced 12 inches apart on center, which aligns well with typical stud layouts when planning wall-mounted shelving runs.
The 48 inch KV85 heavy-duty double slot shelf standard from Knape and Vogt offers a 1-1/4 inch wide by 1/2 inch deep 16-gauge steel profile with an anochrome finish, adjustable 1 inch slot increments, and 12 inch on-center screw holes. Working with any KV double slotted brackets and generally paired with KV185 series double brackets, it supports consistent, adjustable shelving layouts on closet and garage walls. Select this KV Model KV85 length when a 4 foot vertical standard aligns with the wall height and shelf spacing plan on your next project.
Sold In: 1 Each
