Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
4 inch Sedona furniture leg provides a compact support option for low work surfaces and furniture, helping you match specific design heights while staying within a known, repeatable measurement. The furniture leg is a Camar Sedona style part, giving you a consistent visual profile when you need to keep multiple pieces looking the same in a room or project run. The leg is made of 100% aluminum, so the load-bearing structure is metal from top to bottom for a solid feel in use. This construction also avoids wood movement issues, which matters when you are setting level on cabinets or tables in changing environments. A matte aluminum finish gives a subdued metallic look, useful when you want hardware to coordinate with other aluminum components without a high-gloss reflection.
The bottom of the leg features an attached thick felt pad, so floor contact is softer than bare metal and better suited to finished surfaces like hardwood or laminate. The leg can be mounted via an M10 thread screw, giving you a direct threaded connection into a properly prepared base component. This threaded option helps when you want a positive mechanical joint between the leg and cabinet, shelf, or top. The leg can also be mounted using the mounting plate, which provides an alternate interface when you prefer a plate-fixed solution on the underside of a work surface or furniture panel. Having both mounting approaches available supports different construction styles within the same project.
This furniture leg sits in the Work Surface & Tables category, so it is built for use under tables and similar work surfaces where a defined support point is required. As a table leg in the Table Legs product class, it serves as a primary vertical support between the floor and the underside of the top. The 4 inch height suits low-profile furniture, such as low workstations, benches, or cabinets that require only a short lift off the floor. Because legs are available in 4 inch and 6 inch heights, a single Camar Sedona style can run through mixed-height installations, from shorter storage pieces to slightly higher work tops, while holding the same design language. The matte aluminum finish works visually with aluminum-framed components or neutral finishes.
The option to mount via an M10 thread screw gives you a defined fastener interface, which matters when you want consistent leg alignment and a repeatable installation sequence across multiple units. The M10 thread provides a clear target dimension for drilling and tapping in shop-built bases or compatible inserts, supporting precise placement. Using the mounting plate as an alternative gives another stable method to attach the leg when a threaded connection into the substrate is not preferred, while still giving a solid bearing surface under the work top or cabinet. The attached thick felt pad at the bottom spreads the load over a softer layer, which helps protect flooring from point pressure as furniture is positioned. Because the leg is made of 100% aluminum, the vertical member remains dimensionally stable during normal service, helping maintain the set height and angle over time. This combination of defined mounting interfaces and stable material supports cleaner installations across multiple pieces in a job.
The furniture leg height is 4 inches, so it suits low-profile tables or cabinets where you need a short, consistent lift between the floor and the work surface.
The 06-4-M leg is made of 100% aluminum, giving the support a fully metal structure that stays rigid under typical furniture loads and resists swelling.
The furniture leg can be mounted via an M10 thread screw or using the mounting plate, so you can match the connection method to your base construction.
The bottom of the leg has an attached thick felt pad, which cushions contact with the floor and helps reduce marking as furniture is moved into position.
The leg has a matte aluminum finish, giving a subdued metallic look that coordinates with contemporary hardware and avoids the reflection of high-gloss surfaces.
This Camar Sedona style range offers legs in two heights, 4 inches and 6 inches, so you can keep one visual style across mixed-height furniture runs.
This 4 inch Sedona style 6 furniture leg, matte aluminum, ties together height, material, and mounting options for controlled builds. With 100% aluminum construction, a matte aluminum finish, M10 thread or mounting plate attachment, and an attached thick felt pad, it serves projects that need repeatable support points for work surfaces and tables. When your layout calls for low-height legs in a consistent Camar Sedona style, this part number 06-4-M aligns with that requirement and keeps the visual and structural details predictable across the job.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  CM066-M Mfr# 06-6-M | Camar metal cabinet leg 6 inch aluminum |