Metal Cabinet Fixed Height Aluminum, Style 8 Leg 4" Height

Metal Cabinet Fixed Height Leg For Work Surfaces

Metal cabinet fixed height leg from Peter Meier, Inc. is a 4 inch high aluminum furniture leg that supports cabinet and table projects where a defined working height is needed. The 1-3/4 inch diameter aluminum construction provides a solid, uniform support surface, helping cabinets and work tables sit evenly under load. The matte finish on the leg gives a neutral, low-glare look that blends with a range of cabinet and work surface designs. As a Style 8 leg, it incorporates a built in 1 inch adjustable foot, so the installed height can be fine-tuned within that range to compensate for floor irregularities. This fixed-height design with adjustment at the foot helps keep planning straightforward while still allowing height correction at installation.

Key Aluminum Furniture Leg Details For Projects

• The leg is made of 100% aluminum, providing a rigid, corrosion-resistant support that suits indoor cabinet, table, and work surface builds where a metal structural element is preferred.
• The 4 inch height defines the base elevation of cabinets or tables, giving a predictable starting point for overall project height and aiding layout of doors, drawers, and work surfaces.
• The 1-3/4 inch diameter creates a relatively broad contact area, helping distribute weight at each support point and contributing to a stable footprint on typical hard flooring.
• The bottom of the leg features an attached thick felt pad, which cushions the contact with the floor and reduces direct metal-to-floor contact that can mark or scuff sensitive surfaces.
• The leg can be mounted via an M10 thread screw, providing a direct threaded connection that works where a mating M10 insert or component is used in the cabinet or table base.
• The leg can alternatively be mounted using the mounting plate, allowing installers to fasten the plate to the underside of the cabinet or work surface and then attach the leg for straightforward alignment.
• Style 8 features a built in 1 inch adjustable foot, allowing small vertical adjustments at installation to level cabinets or tables when working over uneven flooring conditions.
• Two available finish types give flexibility to match or coordinate the leg appearance with different cabinet or table designs when selecting between finish options.

Mounting And Height Adjustment For This Leg

This aluminum furniture leg mounts either through its M10 thread screw connection or via a separate mounting plate, so installers can choose the interface that fits their construction method. Using the M10 thread supports projects that already use threaded inserts or metal frames with M10 holes, while the mounting plate approach suits wood cabinet bottoms or work surfaces where a plate can be fastened. The 4 inch nominal leg height is paired with the Style 8 built in 1 inch adjustable foot, so leveling is handled at the foot without altering the main leg body. This adjustment range helps align multiple legs to the same working height across a run of cabinets or tables.

How This Peter Meier Leg Supports Real Projects

Where This Aluminum Furniture Leg Performs Best

This Peter Meier, Inc. metal cabinet fixed height aluminum, Style 8 leg is designed as a table and cabinet support in the Work Surface & Tables category, so it fits applications where furniture-style legs are preferred over full plinth bases. The 4 inch height positions cabinets, furniture, or work surfaces at a low but defined elevation, which is useful for work tables, storage cabinets, or furniture pieces that need floor clearance without raising tops excessively. In cabinet runs, using multiple legs with the same 1-3/4 inch diameter and height keeps visual lines consistent along the base, which matters when aligning door reveals and toe clearances. The matte finish plays a role in visual integration, as its subdued appearance reduces reflections under overhead lighting, helping the leg recede visually while the cabinet or top remains the focus.

The 100% aluminum construction means every leg in a project uses the same base material, simplifying expectations about stiffness and weight support at each point. This uniform material choice supports repeated use in multi-leg assemblies such as islands or long work benches where identical legs need to behave consistently under similar loads. The attached thick felt pad at the bottom matters in furnished or finished spaces because it softens contact with hardwood, laminate, or similar floors, helping cabinets or tables slide slightly during positioning without the harsh scraping associated with bare metal. In shop or office environments, this felt interface also reduces transmitted vibration from light movement, which can help keep work surfaces quieter when equipment or drawers are operated.

Why The Mounting And Adjustability Details Matter

The ability to mount the leg via an M10 thread screw or through a mounting plate provides flexibility when planning construction details for cabinets, tables, or work surfaces. In projects using metal framing or pre-installed M10 inserts, the threaded option connects the leg directly into the structure, supporting repeatable, centered leg placement. In wood-based builds, the mounting plate method allows the installer to position and fasten plates in line with cabinet edges, and then attach the legs to those plates so spacing remains consistent from unit to unit. This dual approach supports different shop standards without changing the leg specification.

The built in 1 inch adjustable foot on this Style 8 leg becomes important when cabinets or tables are installed over floors with minor height variations, because the adjustment range allows each leg to be set to compensate for those changes. When several legs are arranged under a large top or long cabinet run, the adjustable foot helps bring all contact points into plane, so the surface remains stable and does not rock. Since the main leg body is a fixed 4 inch component and only the foot moves within its 1 inch range, height changes stay controlled and small, keeping overall design heights predictable while still addressing real-world floor conditions. This balance between fixed leg height and adjustable foot simplifies planning repeatable installations across multiple projects.

Common Questions About This 4 Inch Furniture Leg

Selecting This Aluminum Leg For Your Project

This Metal cabinet fixed height leg from Peter Meier, Inc. combines a 4 inch aluminum body, a Style 8 built in 1 inch adjustable foot, and dual mounting options through M10 thread or mounting plate. That combination supports cabinets, tables, and work surfaces that need a defined base height with on-site leveling capability. When a project calls for a 1-3/4 inch diameter matte finish aluminum support in the Work Surface & Tables category, this furniture leg offers a consistent specification you can repeat across multiple installations.