
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Lavi stainless steel elbow fitting is a 135 degree connector for 1-1/2 inch diameter railing, so it links two rail sections at a clean angled turn where a straight run is not possible. The flush 135 degree angle design sets the rail sections to meet closely at the joint, which helps create a continuous look along a bar or foot rail. The fitting is part of the bar and foot railing and accessories category, so it works in typical railing layouts along bars, counters, or similar runs. The satin stainless steel option uses 304 stainless steel, which supports use in environments where stainless is preferred for its material properties. The same elbow fitting is also available in a bright brass finish, which lets you match the joint to brass rail in projects that call for that look.
This elbow fitting is built for 1-1/2 inch diameter railing, so it mates with rail stock in that size when planning bar or foot rail layouts. The 135 degree angle changes the rail direction by that amount, which is useful when a layout needs a specific shallow turn rather than a 90 degree corner. The flush angle design lets the adjoining rail sections sit closely at the joint, helping create a smoother change in direction along the run. With a bright brass finish option made from solid brass and a satin stainless steel option made from 304 stainless steel, the same basic elbow geometry can be applied in either brass or stainless bar and foot railing projects.
This elbow fitting belongs to the bar and foot railing and accessories class, so it fits typical bar-front or counter-front rail layouts that use 1-1/2 inch diameter tubing. The 135 degree angle suits situations where the rail needs a gentle change in direction, such as wrapping around an angled bar segment or transitioning between wall sections that do not meet at a right angle. Because the geometry is set to 135 degrees, it supports repeatable placement of that specific angle across multiple corners in the same project. The availability of a bright brass version made of solid brass gives an option for bars that are built around brass rail, while the satin stainless steel version made of 304 stainless steel suits projects that call for stainless material in visible rail components.
The fixed 135 degree form of this elbow fitting standardizes the angle between connected 1-1/2 inch rails, which helps keep multiple corners visually consistent along a bar or foot railing run. The flush angle style brings the mating rail ends together at the joint, supporting a more continuous line through the turn compared to separated connectors. When the bright brass finish made of solid brass is used, the fitting carries the same base metal through the joint on brass rail work, which matters where exposed metal is part of the finished design. When the satin stainless steel finish made from 304 stainless steel is chosen, the fitting matches other 304 stainless components in projects that use stainless for its material characteristics. The manufacturer part number 44-730/1H anchors this elbow within the Lavi Industries system, so it aligns with other bar and foot railing and accessories identified within the same product family.
The Lavi stainless steel elbow fitting 44-730/1H is made for 1-1/2 inch diameter railing, so it connects rail sections in that size throughout a bar or foot rail run.
The elbow is a 135 degree fitting, so it changes the direction between two connected 1-1/2 inch rails by 135 degrees for shallow corners.
The satin stainless steel version of this elbow fitting is made of 304 stainless steel, so it suits bar and foot railing projects using stainless rail.
The bright brass finish version of this fitting is made of solid brass, so it pairs with brass bar or foot railing where brass material is required.
This elbow fitting is classified under bar and foot railing and accessories, so it is intended for use in those railing assemblies.
The 135 degree angle lets rail sections navigate shallow corners, so it helps bar and foot rail runs follow angled bar fronts or non-90-degree walls.
This Lavi stainless steel elbow fitting provides a 135 degree connection for 1-1/2 inch diameter bar or foot rails, so it fits projects that need that specific angle. With bright brass and satin stainless steel options, it aligns with either brass or 304 stainless rail material in the same diameter. For work involving bar and foot railing and accessories in this size, this 44-730/1H elbow fitting offers a defined 135 degree turn that keeps the run consistent at each angled corner.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | BC730-1H Mfr# 00-730/1H | Lavi Bright Brass Elbow Fitting 1-1/2" D 135 Degree, 00-730/1H | ||||
Sold in: 1 Each | BC730-2 Mfr# 00-730/2 | Lavi Bright Brass Elbow Fitting 2" D 135 Degree, 00-730/2 | ||||
Sold in: 1 Each | BC730-2SS Mfr# 44-730/2 | Lavi stainless steel elbow fitting 2 inch 135 degree |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | BC201 Mfr# 00201 | Lavi Metal Adhesive D, 00201 | ||||
Sold in: 1 Each | BC110-144SS Mfr# 44-A110/12 | Lavi stainless steel railing 1-1/2 x 144 bar rail | ||||
Sold in: 1 Each | BC110-48SS Mfr# 44-A110/4 | Lavi stainless steel railing 1-1/2 x 48, 44-A110/4 | ||||
Sold in: 1 Each | BC110-72SS Mfr# 44-A110/6 | Lavi Stainless Steel Railing 1-1/2 D x 72 L | ||||
Sold in: 1 Each | BC110-96SS Mfr# 44-A110/8 | Lavi stainless steel railing 1-1/2 D x 96 L |