Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the 20 inch cabinet member from Knape and Vogt's 8400 series, a full-extension side-mount ball bearing slide rated 100 lb per pair in a zinc finish. It is the cabinet-side half of the slide, sold as a single cabinet member in bulk-pack quantity for shops and cabinet builders equipping multiple drawers at once.
Standard-motion slides leave the drawer wherever it stops, and a firmly closed drawer can bounce back a half-inch on contact. The hold-in anti-rebound detent on the 8400 series catches the drawer at the closed position and holds it there until intentionally pulled open. This is not a spring-assisted self-close and it is not a damped soft-close — it is a mechanical detent that simply stops bounce-back. For shop drawers, utility cabinets, and any installation where a drawer drifting open is a nuisance, the detent earns its keep without adding mechanism complexity.
The slide members are cold-formed steel with a zinc electroplate finish. Zinc is the working standard for side-mount ball bearing slides used indoors: it resists the humidity and incidental contact common to kitchen and shop environments and holds up through years of cycling. The finish is functional rather than decorative — it sits beside the drawer box, mostly out of sight when the drawer is closed — which makes it a natural fit where the interior of the cabinet is not a design focal point. This is an indoor finish; it is not rated for wet, marine, or exterior applications.
The 8400 series is Knape and Vogt's volume side-mount line, and this cabinet member is the component that goes to the cabinet panel. Cabinet builders working through a production run benefit from the non-handed format — no left or right sorting, every member fits every opening — and from the bulk-pack, which keeps the bench stocked without counting out retail pairs. Pair this cabinet member with the matching 8400 series drawer members to complete each slide. The 1/2 inch side clearance is the standard for this class: build the drawer box 1 inch narrower than the cabinet opening to leave the required clearance on each side. In face-frame cabinets, add the matching KV rear mounting brackets, sold separately, to support the back end of the slide.
This is the cabinet member only — the half that mounts to the cabinet panel. Order the matching 8400 series drawer members separately to make a working slide for each drawer.
No. The detent is a mechanical catch that stops the drawer from bouncing back open; it does not slow the drawer or pull it shut. If damped closing is needed, look at the KV FM soft-close series instead.
No. The 8400 series is non-handed, so the same cabinet member installs on both sides of the drawer opening. Order the quantity of members your drawer count requires.
The 8400 series requires 1/2 inch of side clearance per slide. Build the drawer box 1 inch narrower than the full cabinet opening width to keep both sides within spec.
Yes, with the right rear support. Face-frame cabinets set the panel back from the door opening, so the back of the slide needs a rear mounting bracket. KV rear brackets for the 8400 series are sold separately.
The 8400 cabinet member gives production shops a straightforward path to full-extension, hold-in drawers — non-handed, bulk-packed, and rated for the loads that show up every day in kitchen and commercial cabinet work.
Sold In: 100 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 100 Each |  KV8400Q92-20 Mfr# 8400-92 20 | KV8400 20" Full Extension Hold-in anti-rebound Ball Bearing Drawer Slides, Drawer Member Unhanded Side Mount Zinc Bulk-Pack - 8400-92 20 |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  KV8402 Mfr# 8402 | Rear Mounting Bracket for 8400 Series Slides, Zinc |
